Nothing amazing, just thought i'd share my MERV journey so far...
Bought it wrecked off eBay, and sold some of the extra bits i didn't need, in the end it cost me £80. It already had TQi tx and RPM a-arms all round:
Then the work started. New chassis (dyed black), dirt hawgs on desperado wheels, some bearings, TQI receiver, stiffer springs and 80wt oil, RPM knuckles f & r, tarted up the body a bit, new wing, Hi-tec servo (86w) and hey presto:
Next was my recently painted body, wheelie bar, and some temporary lights:
Still to do:
fix slight range issue
thicker shock oil
shim and re-oil diffs
oh and actually drive it!!!...