Results 1 to 6 of 6
  1. #1
    RC poster
    Join Date
    Nov 2012
    Posts
    6

    merv upgrades...

    I can't find good tires(for short course racing) or fans(for both motor and esc) for my brush-less Merv so what do u guys recommend?

  2. #2
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    check out proline tires .you will need 2.2" rims and rear buggy tires
    a fan on the esc will help but will not make up for too tall of gearing but muchmore racing has a nice ultra high speed fan that flows some good air. a fan on top of the motor is not a good idea a hard landing on the roof will take it out!

  3. #3
    RC poster
    Join Date
    Nov 2012
    Posts
    6
    Also I am looking for a way to upgrade the tires to pro-line badlands...the hex size is 12mm, but the width of the wheel is twice the hub width so the nut won't attach to the hub...any suggestions?

  4. #4
    RC Qualifier
    Join Date
    Nov 2012
    Location
    Earth
    Posts
    429
    Umm Washers theey work!! With some lock tight on the Bolts

  5. #5
    RC poster
    Join Date
    Nov 2012
    Posts
    6
    washers wouldn't work, the wheel is thicker tan the hub...not the other way around...thanks tho

  6. #6
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    This is what you need http://www.junfac.com/shop/index.php...products_id=21
    Although a 5" tall tire is about 1 1/2" to tall for the mini
    Last edited by 50togo; 02-03-2013 at 10:12 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •