Mods I learned from Fart of Doom. Real Cold Air intake, carnards for increased down force and 70CFM of cooling air from fans and Custom Heat sink and additional lipo with custom tray... I reinforced the body with Rustoleum Auto Undercoat which works the best, stiff with a little flex... I epoxy bonded foam to the front to seal my intake so no air leaks under speed... Indeed a lot of work, but my XO-1 is ready to rock... will post time and temps when weather gets better...

















13 Mustang GT 5.0/XO-1/Jato 3.3/Tmaxx w/ PICCO Red dot/ HPI Vorza Flux/ OFNA LX2/Savox