Results 1 to 3 of 3

Thread: Lights

Hybrid View

  1. #1
    RC Enthusiast
    Join Date
    Jan 2013
    Location
    Wherever
    Posts
    27

    Lights

    How much would LED lights cost for the slash 4X4 and is there any lights for rpm bumpers.

  2. #2
    RC Champion
    Join Date
    Dec 2012
    Location
    Lehi, Utah
    Posts
    1,316
    Yes RPM makes front and rear light canisters for about $10 each. I picked up a set of 6 LED's (2 red 4 white) from integy for $20. They were 5mm lights and the holes on the RPM canisters take 3mm lights so I had to drill the holes bigger on the canisters but really wasn't that hard. It was totally worth it for $30 and they have work really well.

  3. #3
    RC Racer
    Join Date
    Jan 2013
    Location
    Delaware
    Posts
    123
    TRA6784 (stampede 4x4 light bar) fits nicely and looks like the rpm light kit.... but the traxxas one is 2 screws and plug it into the receiver... done, $10 for bright little lights, and they're protected by the rpm bumper. put this on my sons slash a month ago, and he's bashed it pretty good, lights are perfect still.

    oh, had to trim the front of the body about 1/8'' to clear the light cans..
    and if you do this just don't tighten down the two screws attaching the light housing too much.... stop when you see the plactic just starting to compress a bit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •