I am looking for a new WATERPROOF ESC and WATERPROOF Brushed motor. I would also like a LOT of torque, but speed doesnt matter. It would be nice if it all sumed up around $100-$200. Please help me out!!!
I am looking for a new WATERPROOF ESC and WATERPROOF Brushed motor. I would also like a LOT of torque, but speed doesnt matter. It would be nice if it all sumed up around $100-$200. Please help me out!!!
Waterproof MMM v2 esc, 18v Dewalt motor, 2x 3s lipped.
Lots of torque, will crawl slowly, and smoothly.
Sent from my ADR6350 using Tapatalk 2
Where can i get that ESC.
Green.. Green is nice
Every motor is waterproof... water just accelerates wear.
The stock ESC is also waterproof... and can handle the above suggested motor just fine.
Whatever it is I just said... I could be wrong.
Can i put a tekin t35 pro motor on that esc
Rating of the ESC:
http://traxxas.com/products/parts/escs/3019Revx2lvd
Motor Limit (540 size): 10-turns
Motor Limit (550 size): 12-turns
I don't see the size listed on the Tekin, but I do suggest at least a 1/8 scale motor; the Summit is a very large RC for a 10th scale motor to try to push around.
Whatever it is I just said... I could be wrong.
For the record, it would be cheaper, and more economical to use the stock esc and a dewalt14.4 volt.
But you asked for the torque-est motor option.
Jimmy as always is right, motors are waterproof. If your going to use the a mamba, you may as well go brushless.
Sent from my DROIDX using Tapatalk 2
Could i use the Waterproof Mamba Monster 2 ESC with a DeWalt 18V motor, and 2 7.4V 5800 MaH Traxxas LiPos on my Traxxas Summit?
Yes, you can.
Whatever it is I just said... I could be wrong.
Or you could get Outerwears and it wouldn't matter if the ESC is waterproof. But if you already have a EVX-2, get a DeWalt motor and your EVX-2. And if its a new EVX-2 with LVD, you could use Lipos.
Summit Tekin RX8 2250kv
If you dont have 3s lipos dont bother with the 18v dewalt.
Go 14.4v dewalt.
Sent from my DROIDX using Tapatalk 2