Results 1 to 3 of 3

Hybrid View

  1. #1
    RC poster
    Join Date
    Dec 2012
    Posts
    14

    Tqi receiver in large scale use.

    Will a trx receiver hadle the large dual servo setups used in 1/5 buggies and trucks? I know there is a 2nd ch 1 out for that, but is there any current limitations to watch for? Never done large scale but nitro at $30 a gallon to $4 for gas is a big deal.

  2. #2
    RC Turnbuckle Jr. JimmyNeutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, Michigan
    Posts
    12,290
    I am curious as to how many amps the Rx is capable of withstanding as well. I have asked a few times to different Traxxas employees and have not gotten a response.

    Besides the size, as long as they are not crawlers I imagine they are not going to pull that much more than the "1/10th" scale 1/8th size Traxxas RC's.

    If it is that big of a concern, power the servos with a separate BEC and bypass the Rx all together.
    Whatever it is I just typed... could be wrong.

  3. #3
    RC Turnbuckle Jr.
    Join Date
    Dec 2006
    Posts
    4,398
    Shouldn't be a problem, the + and - pins on each channel are joined together like a bridge, if you have doubts, just add a piece of wire from the very first channel to the fifth on both + and - pins, and add solder to each of them... I'll post a picture tonight...
    200, 202, 420, humor 404, 301 to rc10talk, 410.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •