Summit Dual 775 Questions

[E-slamnit]

I'm looking to put dual 775's on my Summit.

1. Can I just use the dual motor mount from the E-Maxx and just move the EVX-2.
2. Can the EVX-2 handle 2 775's. If so how do you hook them up.
3. What different speed will I see. Run time? (with nimh stock)

I know you will all say to go brushless but I just spent money on getting a E-Revo.

[Jimmie Neutron]

1. The way they mount is different... not 100% sure it will work
2. No.
3. Same speed and about half the amount of run time.

[E-slamnit]

Can it handle to 550s
What mount could i use to do so

[danielhr77]

More info here: http://traxxas.com/forums/showthread...VX-2-Handle-it

But, if it can handle two 700HO with proper gearing, it can handle two 775...

[E-slamnit]

Yeah I saw that and thought the same thing. Gearing isn't a problem.
Is the 700HO available as only the mount.

[DogMilk]

I would take a look at kershaw designs. They have a motor plate sale that will make mounting two 775s a breeze.

I would recommend however a single dewalt 14.4. Again, check the Kershaw Designs website for that too. The have a sweet motor plate for that too!

Sent from my DROIDX using Tapatalk 2

[E-slamnit]

I cant find the motor plate by its self.

[noir 522]

An emaxx motor plate should work, I had a tekin Truggy motor on mine - no issues.

[E-slamnit]

Does it fit up to the exact holes and fits 2 motors

[DogMilk]

I cant find the motor plate by its self.

http://kershawdesigns.com/MotorMounts-Summit.html

Select 700/775 for two 775, or Dewalt motor plate if you go 14.4 Dewalt. You won't regret it!

Sent from my ADR6350 using Tapatalk 2

[E-slamnit]

Ok thanks will the two 775's work on one evx-2

[Jimmie Neutron]

post #4, follow the link

[E-slamnit]

Do you know the wiring setup? Is it just like one motor gets 1 + and 1- unlike one motor getting 2+ and 2- wires.