Results 1 to 5 of 5
  1. #1
    RC poster
    Join Date
    Aug 2011
    Posts
    11

    steering link on slayer

    Does anyone know the correct length of the steering link on the slayer pro 4x4?

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Tanker 822
    Posts
    9,683
    You talking about the linkage between the servo and arm? Per the manual Page 34: 41.8mm.
    If you are talking about at the corners, I screw the end links all the way in and when the rest of the system is straight and the tires are straight I hook the links up and then adjust accordingly.
    The Super Derecho

  3. #3
    RC poster
    Join Date
    Aug 2011
    Posts
    11
    Ok I got the linkage to 41.8mm but now it wont reach from the servo to the arm. I upgraded my old slayer to the pro4x4 and I forgot to order the stock linkage so I went to a hobbytown usa and they didnt have the stock linkage so I got an aftermarket linkage. And when I set it to 41.8mm its too short. At this point I really dont know whats causing this problem.
    Last edited by Stephen-B; 01-22-2013 at 01:04 PM.

  4. #4
    RC Competitor
    Join Date
    Sep 2011
    Location
    Tucson, AZ
    Posts
    69
    I wouldn't really worry about exact lenght. +1 to Double G's post. 1) With your radio system on and servo centered, center the wheels and then adjust the linkage to a close fit. 2) Install linkage and 3) fine tune from there.

  5. #5
    RC poster
    Join Date
    Aug 2011
    Posts
    11
    Ok thanks for the help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •