Results 1 to 4 of 4

Thread: 2.5 disassembly

  1. #1
    RC Competitor
    Join Date
    Jan 2011
    Posts
    84

    2.5 disassembly

    I am taking a part a 2.5 and I need to get the crankshaft out, the piston and sleeve are out. Do you push the crankshaft toward the exhaust outlet or pull it out on the carb side

  2. #2
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Woodward, OK
    Posts
    419
    It will push out through the exhaust side. Sometimes I have to use the handle of a screwdriver or a dead blow hammer, and tap from the flywheel side. Don't use any thing hard that will damage the end of the crank.
    T-maxx 3.3
    Rusty 2.5r
    Summit VXL
    Nitro 4-tec

  3. #3
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Tanker 822
    Posts
    9,404
    The Super Derecho

  4. #4
    RC Competitor
    Join Date
    Jan 2011
    Posts
    84
    Thanks in tapped it gently out the exhaust side and I didn't move so I thought I was better off asking quickly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •