Hi,

I have installed the clutch adapter to the 5409 engine. The nut that attached to the ISP shaft is 8mm and the nut on the adapter is 10mm. this causing to the clutch shoes to get open. Picture attached.
The bell is still rolling free and is not touching the clutch shoes, but the bell is not 100% covering the shoes. Picture attached.


Before I fire up this engine is that oK?

http://img717.imageshack.us/img717/5...6132005200.jpg
http://img40.imageshack.us/img40/341...6132245173.jpg


Thanks,
Oren.