Page 3 of 4 FirstFirst 1234 LastLast
Results 81 to 120 of 140
  1. #81
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    We have to get through the testing phase first. And then maybe Medas360 can put a price on them. All this is still in development. So patients is required.

  2. #82
    RC Competitor
    Join Date
    Jan 2012
    Posts
    85
    Any update on the progress?

  3. #83
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    No news as of yet.
    If its not breaken then your not racing.

  4. #84
    RC poster
    Join Date
    Jan 2013
    Location
    Birmingham, AL
    Posts
    16
    1 friend is modeling the front bulkhead and the other is doing the rear bulkhead with the required changes to accommodate the LS2. Once that is complete, I will send a file to clp71220 to look over and make sure I did not miss anything, then I will literally drop the part in to the CAM software to generate the cut paths to machine the parts for him to attempt to destroy.

  5. #85
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    so you are designing the bulkhead to fit the aluminum case and not have the case built into the bulkhead?

  6. #86
    RC Qualifier
    Join Date
    Jan 2013
    Location
    The Netherlands
    Posts
    840
    It would be really sweet to have hybrid bulks . Might look into that myself.. I have the CAD experience, the tools.. Now if I only had the time..

  7. #87
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    like flm hybrid for the e maxx but for the revo. i worry less about my maxx diffs then my revo's with tin gears and aluminum cups

  8. #88
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    yes 50togo we will try the lst2 case fit first and if that does not hold up. Ill see if Medas360 can make the Bulkheads into a case. I have a feeling the material Medas360 will be using will be a serious improvement over the stock bulkheads. I feel the Stock bulkheads where built to fail.
    If its not breaken then your not racing.

  9. #89
    RC Competitor
    Join Date
    Jan 2012
    Posts
    85
    Has me foaming at the mouth I can't wait to see how this turns out.

  10. #90
    RC Racer
    Join Date
    Feb 2013
    Location
    Buffalo, New York
    Posts
    108
    Any updates yet?

  11. #91
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    Still working the design out.
    If its not breaken then your not racing.

  12. #92
    RC poster
    Join Date
    Oct 2012
    Posts
    3
    I'm very interested in this.. I've shredded literally hundreds of dollars worth of diffs in my brushless Summit, and decided to go with the Revo diffs in hopes of better durability... I can see that this is very promising, and will definitely be buying a set or 2 if this becomes reality..

    Sent from my Nexus 7 using Tapatalk 2

  13. #93
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    It's going to be a reality. Still working on it.
    If its not breaken then your not racing.

  14. #94
    RC poster
    Join Date
    Oct 2012
    Posts
    3
    My problems with the Summit diffs was shredding the internal gears.. I think a reinforced bulkhead with a stronger set of gears in the stock/aluminum housing would make our trucks a lot stronger..

    Sent from my Nexus 7 using Tapatalk 2

  15. #95
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    Wont help with the spider gears unless they needed shimming too. I shimmed mine but still wasnt enough losi is a 6 spider gear compared with stock 4

  16. #96
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    Yes this modification will be for the Losi Lst2 differentials to fit the erevo bulkheads using a better stronger more impact resistant material. I have seen some of the work already done and i am very excited about what is coming.
    If its not breaken then your not racing.

  17. #97
    RC Racer
    Join Date
    Feb 2013
    Location
    Buffalo, New York
    Posts
    108
    How about a status update guys

  18. #98
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    Well there is not much to report. The bulkheads are being developed for the LST2 differentials. The material being used is top secret at this point. I have reviewed some of the CAD drawings and made some suggestions on problem areas in hopes that we will build a bulkhead that will not break. This is the slow part of Research and Development as we are starting from scratch. Niether I or Medas360 can not rush this part. It is however being developed.
    If its not breaken then your not racing.

  19. #99
    RC Champion
    Join Date
    Aug 2006
    Posts
    1,736
    I'm in for pre-ordering my set of front and rear hybrid bulkheads. Where do I send my 50 bux?
    It's been fun. See ya.

  20. #100
    RC Qualifier
    Join Date
    Jan 2013
    Location
    The Netherlands
    Posts
    840
    Have said it before, but i can't wait to see where this ends .

  21. #101
    RC Turnbuckle Jr. MITCH316's Avatar
    Join Date
    May 2012
    Location
    Australia
    Posts
    3,257
    I'm with mistercrash there....
    Rock n Rolla !

  22. #102
    RC Qualifier
    Join Date
    Mar 2013
    Posts
    363
    any updates on the bulks?

  23. #103
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    I received word that they are finishing up the model files. And hopefully it will not be to much longer and I will begin testing bulks. I have ordered extra battery packs for this testing phase.
    If its not breaken then your not racing.

  24. #104
    RC Qualifier
    Join Date
    Jan 2013
    Location
    The Netherlands
    Posts
    840
    Good news! I'm really waiting for these parts!

  25. #105
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Athens, Greece
    Posts
    571
    a bravo from me as well. i am surely buying a set when its out. preferably losi diffs without the case but i ll go either way,
    <3 Traxxas~Align~Ducati~Lib-tech~JacksonGtrs <3

  26. #106
    RC Qualifier
    Join Date
    Jan 2013
    Location
    The Netherlands
    Posts
    840
    Yep, same for me. Losi diffs, with or without case. As soon as you're ready i'm ready to buy them.

  27. #107
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Saint Louis, MO
    Posts
    504
    Interested as well

  28. #108
    RC Competitor
    Join Date
    Jan 2012
    Posts
    85
    Ya I am foaming at the mouth waiting for these hehe.

  29. #109
    RC poster
    Join Date
    Mar 2011
    Posts
    6
    I am in for two sets!

  30. #110
    RC Qualifier
    Join Date
    May 2012
    Location
    la porte
    Posts
    587
    What's the ETA any update
    6S OR NOTHING............................ maybe 5s

  31. #111
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    Working out the details on the cad drawings. High hope for these bulks.
    If its not breaken then your not racing.

  32. #112
    RC poster
    Join Date
    Apr 2013
    Location
    Austria
    Posts
    13
    I'm waiting for these too!!!!

  33. #113
    RC Competitor
    Join Date
    Jan 2012
    Posts
    85
    Any new updates on your progress yet?

  34. #114
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    I have nothing to report at this point. Medeas360 is still working on them as he gets time. But his main line customers have to come first. Last I had heard they where finishing the cad drawings and that his cad person was working on a redesign of a Yacht interior. So lets be patient.
    If its not breaken then your not racing.

  35. #115
    RC Qualifier
    Join Date
    Mar 2013
    Posts
    363
    thanks for the update. but i sure am waiting for them to come out.

  36. #116
    RC Racer
    Join Date
    Nov 2012
    Location
    North Louisiana
    Posts
    236
    Me too I still have to test them before orders can be placed.
    If its not breaken then your not racing.

  37. #117
    RC Qualifier
    Join Date
    May 2012
    Location
    Portugal
    Posts
    293
    News from that project?
    I think if someone make the bulkheads hybrid to fit the Losi Diff in a good plastic like mugen uses, or going for pure stainless steel on the bulkheads and the Losi diff have a direct fit... i will buy those!

    Paypal is ready!

    Why no aftermarket brands come up with this? Only integy bulkheads... ahhhhhh This is a Traxxas CAR, So the world is waiting for parts!

    Sometimes i see opurtunities of making easy money fast and making people happy... and it's down the toilet... bahhh

    Come on... make them and sell the credits to a major RC aftermaket brand, or sell them in your house for the world with paypal!

    NEWs, of that... please!

  38. #118
    RC Champion
    Join Date
    Aug 2006
    Posts
    1,736
    Quote Originally Posted by mistercrash View Post
    I'm in for pre-ordering my set of front and rear hybrid bulkheads. Where do I send my 50 bux?
    Well it's too late for me now, I spent my 50 bux on something else.
    It's been fun. See ya.

  39. #119
    RC Qualifier
    Join Date
    Mar 2013
    Posts
    363
    what's the latest and greatest on the new bulkheads?

  40. #120
    RC poster
    Join Date
    Feb 2012
    Posts
    16
    Wats good is a decent heat sink a nice alumimium one tht also looks good

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •