Results 1 to 2 of 2
  1. #1
    RC poster
    Join Date
    Jan 2013
    Posts
    17

    Servo is working in revers.

    I just change my radio and receiver to a 2.4ghz in my jato. Everything is working fine but the throttle servo. When I hit the gas and the brakes are apply. I hit brakes and the gas is applied. The radio and remote is in the normal setting. The only way I can drive normal is to put the throttle control in the revers setting. The problem with that is it negates the build in fail safe. If for any reason the connection is lost the build in fail safe will engage the throttle not the brakes because the radio is in revers.

    Has anyone had this problem? and what can be done?

  2. #2
    RC poster
    Join Date
    Jan 2013
    Posts
    17
    Found the problem. The new radio system is setup for my buggy. I though all radio systems worked the same no matter what I put it in. When I put the system in the buggy, worked just fine because of the way the servo sets, which is complete opposite in the jato. I just need to buy a new system.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •