Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Jan 2013
    Posts
    1

    Revo axel dilema!

    I recently purchased a used revo that needed some work. It had no axels in the front. It has a 3.3 engine. I ordered a set of axels for a Nitro revo 3.3. When I recieved them they were larger in diameter, about 3/8" longer and the shaft that goes through the wheel bearings is about 3/16" to short. Are there early and late model revo's? Does anyone have any ideas?

    Thanks

  2. #2
    RC Qualifier
    Join Date
    Sep 2006
    Location
    West Virginia
    Posts
    486
    All the Revo axles should be the same. Only Revo platform that got fifferent axles I believe was the Traxxas Summit.
    One shot.....One kill, no exceptions

  3. #3
    RC Qualifier
    Join Date
    Apr 2008
    Location
    Indianapolis Indiana
    Posts
    788
    Post a pick it sounds like it may have T-Maxx axles on it or it is not a Revo maybe an older T-Maxx because those had smaller axles on them.
    Drive it, Break it, Upgrade it

  4. #4
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Tanker 822
    Posts
    9,625
    Make sure that the bearings are fully seated in the axle carriers and that the axle is completely seated too.
    The Super Derecho

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •