Results 1 to 16 of 16

Thread: Sway bar kit

  1. #1
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    49

    Sway bar kit

    I'm interested in the sway bar kit and was wondering what u have to modify cause I seen the kit comes with
    A drill bit. Can someone help? Thanks

  2. #2
    RC Qualifier
    Join Date
    Sep 2006
    Location
    West Virginia
    Posts
    493
    You have to drill the lower rear Rockers. Front is a direct fit.
    One shot.....One kill, no exceptions

  3. #3
    RC Turnbuckle Jr. humayrayakongkinaon's Avatar
    Join Date
    May 2011
    Location
    Long Beach, California
    Posts
    6,879
    Quote Originally Posted by slayerpro3.3 View Post
    I'm interested in the sway bar kit and was wondering what u have to modify cause I seen the kit comes with
    A drill bit. Can someone help? Thanks
    the drill bit is for drilling the lower rear rocker. theres also a triagle shape piece of plastic, use it as a guide to drill the rocker.
    | Rally GT8 Powered By CC |_________________ |

  4. #4
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    49
    ok alright. thanks guys

  5. #5
    RC Turnbuckle Jr. MITCH316's Avatar
    Join Date
    May 2012
    Location
    Australia
    Posts
    3,259
    Rock n Rolla !

  6. #6
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    49
    ok i see now. thanks for the help.does traxxas make the red sway bars cause i been looking and i only saw just the chrome ones.

  7. #7
    RC Turnbuckle Jr. MITCH316's Avatar
    Join Date
    May 2012
    Location
    Australia
    Posts
    3,259
    I replaced the front stock linkage from the swaybar kit with these beefier 49mm aluminium turnbuckles #3738. You get them in blue too.
    Rock n Rolla !

  8. #8
    RC Qualifier
    Join Date
    Sep 2006
    Location
    West Virginia
    Posts
    493
    I used the Jato turnbeckles on my Revo sway bars.
    One shot.....One kill, no exceptions

  9. #9
    RC Competitor
    Join Date
    Dec 2010
    Posts
    81
    You could use a red Sharpe on the stock chrome ones,I've done it and it works just fine.

  10. #10
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    Quote Originally Posted by slayerpro3.3 View Post
    ok i see now. thanks for the help.does traxxas make the red sway bars cause i been looking and i only saw just the chrome ones.

    No Traxxas doesn't make the sway bar kit with the red linkage only the sliver ones the red linkage only came on the Platinum Revo but like Bloody Wheels said you can use the Jato turnbuckles. That is what Traxxas used on the Platinum Revo sway bar linkage.
    I wanted to put a really cool signature but I ran

  11. #11
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    49
    ok thanks ill look into gettting those then. i still have to buy the sway bar kit though and also the turnbuckles then if i wanna upgrade

  12. #12
    RC poster
    Join Date
    Apr 2012
    Posts
    13
    There is a Sway bar kit for the Slayer Pro that does not require any drilling or mods. This kit strictly bolts up. The part# is Tkr1013 and you can find it @teknorc.com Or you can have your lhs order one in for you like i did. I ordered mine last week and the shop called me today and said its ready for pick up. I will be picking it up tomorrow. It shows its for a revo but i was assured that it fits the Slayer Pro as well. Here's a link....
    http://www.teknorc.com/shop/tkr1013-...-revo-2-5-3-3/

  13. #13
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    49
    ok i just oredered it. let me know if you have any trouble with ur install thanks

  14. #14
    RC poster
    Join Date
    Jan 2013
    Location
    Turkey
    Posts
    13
    I have a question: I want a sway bar on my Slayer Pro but even I searced the whole forum and web, I still couldn't figure out which kit to use. Trx5998? Trx5498? or Tkr1013? I live in Turkey and only part on sale here is 5498. If that is not suitable then i'll have to order from USA so it means waiting 2 weeks for delivery.
    Slayer Pro 4x4 a.k.a. upcoming SnowSlayer

  15. #15
    RC Competitor
    Join Date
    Sep 2011
    Location
    Tucson, AZ
    Posts
    69
    The 5498 will work fine.

  16. #16
    RC poster
    Join Date
    Jan 2013
    Location
    Turkey
    Posts
    13
    I ordered tkr1013 already my so called HS owner friend asked 75$ for 5498 and i went off my way and ordered tekno sway bar for 24$ plus 11$ shipping
    Slayer Pro 4x4 a.k.a. upcoming SnowSlayer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •