Newbie upgrade, and replacement parts,...

**janmichael_zamora** · 03-01-2013 10:29 PM

**janmichael_zamora** · 03-01-2013 10:38 PM

start with the slipper clutch,....

**janmichael_zamora** · 03-01-2013 10:48 PM

need help, pressure plate rubbing with the bulkhead, what did i missed? what is wrong?

**doubletapdaddy** · 03-01-2013 11:31 PM

Did you move the pin to the "other" hole? The one closest to the pressure plate? With exception of the driveshaft yoke/outdrive on the right of the pic (I'm running a Tekno driveshaft), it should look exactly like this following revo-spec mod (note last pin-hole to the left of the pic is vacant):

**janmichael_zamora** · 03-01-2013 11:33 PM

yes i did, but still it touches the bulkhead

**doubletapdaddy** · 03-01-2013 11:38 PM

Post a side pic.

**pa2pla** · 03-01-2013 11:38 PM

Originally Posted by janmichael_zamora

before (Traxxas steel constant velocity shafts

after MIP CVD X-Duty Shafts, F/R

what did you think of the Traxxas steel constant velocity shafts in australia the mips cost with shipping dont seam worth it for me

**janmichael_zamora** · 03-01-2013 11:47 PM

here

**janmichael_zamora** · 03-01-2013 11:56 PM

the traxxas steel constant shafts works great, but in some point they also have great weakness, pins doesnt have any hex screw, only rubber cover holds them, once the rubber pops up, game is over for the shafts

**doubletapdaddy** · 03-02-2013 12:09 AM

Just disassembled mine. It rubs a little on each side when not braced/supported by the other. Does it rub when connected to the driveshaft and chassis?

**janmichael_zamora** · 03-02-2013 12:18 AM

Originally Posted by doubletapdaddy

Just disassembled mine. It rubs a little on each side when not braced/supported by the other. Does it rub when connected to the driveshaft and chassis?

yes it does, the shafts looks like it can get more deeper into the diff assembly, so it would rub more badly and worst if running

**doubletapdaddy** · 03-02-2013 12:21 AM

Beats me. Maybe reverse the mod (easy enough to do), assess the stock fit, and go from there?

**janmichael_zamora** · 03-02-2013 12:43 AM

i guess the pin slot is way a little too deep, and also maybe my shaft is shorter than normal,...

**doubletapdaddy** · 03-02-2013 01:00 AM

Are you sure that this isn't just a bad dream? Maybe you should pinch your output shaft.

**janmichael_zamora** · 03-02-2013 01:12 AM

made a lil more mod for this, and it lessen rubbing issue, but still need to buy new shaft to make things smoother,

**janmichael_zamora** · 03-02-2013 01:18 AM

Originally Posted by doubletapdaddy

Did you move the pin to the "other" hole? The one closest to the pressure plate? With exception of the driveshaft yoke/outdrive on the right of the pic (I'm running a Tekno driveshaft), it should look exactly like this following revo-spec mod (note last pin-hole to the left of the pic is vacant):

hmmmmmm,.......btw how tight should i adjust this revo spec slipper clutch, for bashing, wheelies, with 3s lipo?

**spenniepoos** · 03-02-2013 06:54 AM

I would start at 1/2 turn from tight and see how you like it but its all about playing round to get it how you want it

...peace

**janmichael_zamora** · 03-03-2013 12:45 AM

Originally Posted by spenniepoos

I would start at 1/2 turn from tight and see how you like it but its all about playing round to get it how you want it

...peace

thanks dude,.....

**spenniepoos** · 03-03-2013 04:55 AM

No worries i had no problems with fitting mine but do play around with the slipper and find the sweet spot for your driving style....peace

**janmichael_zamora** · 03-08-2013 02:29 AM

1/2 turn from tight, hahaha,..... only with 2s, on carpet, so this is revo spec slipper clutch, good thing i have a spare for this drive hub,.... now with 3/4 turn, hope not to break this hub, no more spare,.....

**o0wiz0o** · 03-08-2013 03:09 AM

Get the Tekno dog bone shaft....

**spenniepoos** · 03-08-2013 10:50 AM

Or just replace that drive hub part number 6888 its cheaper and they dont break very offten i have only broke 1 in over 2 years but if you have the cash do what wiz said and get tekno big bone

.....peace

**janmichael_zamora** · 03-08-2013 02:37 PM

Originally Posted by spenniepoos

Or just replace that drive hub part number 6888 its cheaper and they dont break very offten i have only broke 1 in over 2 years but if you have the cash do what wiz said and get tekno big bone

.....peace

yup i already replaced it with that part just now,

but i think i want that tekno big bone for my pede, looks good,....

thanks guys,.......

**spenniepoos** · 03-08-2013 02:56 PM

Yeah the big bone will make the drivetrain more bulletproof which is sweet

.....peace

**janmichael_zamora** · 03-09-2013 11:48 PM

Originally Posted by spenniepoos

Yeah the big bone will make the drivetrain more bulletproof which is sweet

.....peace

haha,.... i love bulletproof stuff, ill have that big bone soon,.... thanks dude,....

**spenniepoos** · 03-10-2013 07:59 AM

After i have gone 17mm hex with new wheels and tyres i am go to get the tekno big bone and thats as bulletproof as i can make my pede

.....peace

**janmichael_zamora** · 03-10-2013 11:13 PM

Originally Posted by spenniepoos

After i have gone 17mm hex with new wheels and tyres i am go to get the tekno big bone and thats as bulletproof as i can make my pede

.....peace

now my new wheels and tires, are on their way, tekno big bone will be next,

**janmichael_zamora** · 03-10-2013 11:23 PM

done with this huge fan and heatsink mods,... ready for the summer hot,

**spenniepoos** · 03-11-2013 05:10 AM

That fan is a monster if that does not keep the motor cool what will

......peace

**janmichael_zamora** · 03-11-2013 03:43 PM

Originally Posted by spenniepoos

That fan is a monster if that does not keep the motor cool what will

......peace

hahaha,...... yah, its a monster,....

**janmichael_zamora** · 03-11-2013 03:50 PM

my next mod

awww,.... i broke my bbearing,......... have a spare of plastic one, i dont know if this will work just fine as the ball bearing does,....

done!!

**spenniepoos** · 03-12-2013 04:19 AM

Nice dude another bulletproof item on your pede

........peace

**4x4stampedevxl** · 03-12-2013 09:03 AM

How is that strc steering? I was going to order the exact same hoping to eliminate some slop. Looks great!!

And what fan/heatsink is that? Looks awesome!!

**janmichael_zamora** · 03-12-2013 03:53 PM

Originally Posted by spenniepoos

Nice dude another bulletproof item on your pede

........peace

thanks,....

**janmichael_zamora** · 03-12-2013 04:03 PM

Originally Posted by 4x4stampedevxl

How is that strc steering? I was going to order the exact same hoping to eliminate some slop. Looks great!!

And what fan/heatsink is that? Looks awesome!!

strc steering works great, just dont tighten the adjustment too much or else servo saver wont work, and slop? i gues i dont have it now with this alum parts,.....

for the fan and heatsnik, yes they are awesome, but you really need to do mods for this mods cause this isnt made for our motor, i just saw this on one of the forums, it tooks me 3days before i finish this, hahaha,..... cause it was my 1st time using a dremel, took 5charges of dremel before i came to this mod done,..

**janmichael_zamora** · 03-18-2013 04:26 PM

New updates and upgrades with my pede

**janmichael_zamora** · 03-18-2013 04:43 PM

bad news and good news for me,....bad news, i ordered the wrong part no. Good news i like even i got the wrong one,

this is supposed to be a trencher tires mounted in desperado wheels, but what i have now are this masher tires in desperado wheels,.... i think it looks awesome anyway,....

im more happy that i surprised myself,.... lol

**janmichael_zamora** · 03-18-2013 04:48 PM

Also got my new Ford Raptor SVT body,.... but still undecided on what color combination and lines i want,....

**janmichael_zamora** · 03-18-2013 04:55 PM

And also,...... to safe guard my pede,..... Also got this T-Bone bumper and Clear Servo Guard,..... love this,.......

fresh from mail,....

**4x4stampedevxl** · 03-18-2013 06:26 PM

Those mashers look **** good! How do they run?

Like the bumper and guard too! I've got one coming as well!

Great build!

Thread: Newbie upgrade, and replacement parts,...

Thread Tools

Display

Posting Permissions