Results 1 to 4 of 4

Thread: Dewalt 14.4v

  1. #1
    RC Qualifier
    Join Date
    Dec 2012
    Location
    Newcastle, Australia
    Posts
    960

    Dewalt 14.4v

    do kershaw designs sell the motor completely ready to drop in with the wires soldered in and the brushes installed? by the way i know there is some motor mount mods to be made

  2. #2
    RC Turnbuckle Jr. Jimmie Neutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, MI
    Posts
    12,281
    I believe so.
    But it also seems that every time I read about a purchase from KD there are changes to what has been done... I do not know if the changes are required or not.
    Whatever it is I just said... I could be wrong.

  3. #3
    RC Turnbuckle Jr. MITCH316's Avatar
    Join Date
    May 2012
    Location
    Australia
    Posts
    3,256
    No, they sell it with 2 single 14g...post #18 has a pic of what you will get.

    I bought one from them...ran it with the supplied wires for about 3 weeks and then soldered 10G wire to the brushes...post #89 is what I did. There was a noticeable difference when I used the 10G wire.
    Rock n Rolla !

  4. #4
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Hurley, MS
    Posts
    381
    Agreed. 10G wire is the way to go. Just order the Dewalt by itself and then do all the wiring on your own. Not hard at all. I have a post with part numbers and pics. Pavesurfer has a GREAT write up on the install. Feel free to ask any questions.


    Sent from my iPhone 4s 32g using Tapatalk
    SUMMIT,EREVO
    P4DE,MERV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •