Results 1 to 5 of 5
  1. #1
    RC Enthusiast
    Join Date
    Dec 2012
    Location
    Australia
    Posts
    31

    Question OMG just spent 200$ on stuff for my rustler

    now i want to start to get allimunim parts but dose any one know any thing about the gear cogs i just bought part 4116 and4470 could i have one any thing dif ????????????????

  2. #2
    RC Enthusiast
    Join Date
    Dec 2012
    Location
    Australia
    Posts
    31

  3. #3
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Woodward, OK
    Posts
    468
    The 4116 is a 16 tooth clutch bell. The stock one in 20. A 16 tooth will slow the top speed way down, and increase the bottom end, or torque alot. You may have a problem keeping the front end down, and may eat drive shafts. The 4470 is the stock 70 tooth spur gear.
    T-maxx 3.3
    Rusty 2.5r
    Summit VXL
    Nitro 4-tec

  4. #4
    RC Enthusiast
    Join Date
    Dec 2012
    Location
    Australia
    Posts
    31
    thanks sweet!!

    thanks do they sell them and would u put it in

    would be good on a small corse
    Last edited by Double G; 01-02-2013 at 11:55 AM. Reason: merge, this would be a good case for using the "edit" button

  5. #5
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Woodward, OK
    Posts
    468
    I myself would not run the 16 tooth, but I run in pretty wide open spaces. I have a hard time keeping the front end down with a 20 tooth at times. I tuned the rear suspension and helped alot. The 16 would probably be ok on a short tight track, it should jump out of the hole if you can hook the tires up.
    T-maxx 3.3
    Rusty 2.5r
    Summit VXL
    Nitro 4-tec

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •