Results 1 to 14 of 14

Hybrid View

  1. #1
    RC poster
    Join Date
    Nov 2012
    Posts
    17

    Thread size on the end of the stub axles ?

    Hey guys, out at sea at work, need to know if the threads are M6 or M5 on the axles of my ERBE ?
    Anyone care to check and let me know ?
    Thanks in advance...

  2. #2
    RC Champion
    Join Date
    Aug 2012
    Location
    Central NJ
    Posts
    1,245
    M6

    Sent from my Transformer Prime TF201

  3. #3
    RC poster
    Join Date
    Nov 2012
    Posts
    17
    Thank goodness, spent two hours making some hex stabilisers thinking they were 6mm threads and then started looking around here and was sure there was some mod with a 5mm thread and some brass inserts...everyone sure, last chance as I don't have a lathe at home...Thanks Justin...

  4. #4
    RC poster
    Join Date
    Nov 2012
    Posts
    17
    Perhaps the older E-revos only had 5mm axles ? Can anyone clarify this?

  5. #5
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    Pretty sure they were 6mm too

  6. #6
    RC poster
    Join Date
    Nov 2012
    Posts
    17
    No-one got a spare they can check for me ?

  7. #7
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    I just pulled up for an old t maxx and e maxx used the same

  8. #8
    RC poster
    Join Date
    Nov 2012
    Posts
    17
    Not quite sure what you mean, sorry?

  9. #9
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    They were both 6 mm

  10. #10
    RC poster
    Join Date
    Nov 2012
    Posts
    17
    Sorry if I am being a bit thick here, I know the axles are 6mm but the threads on the end of them are they M6 ?
    Thanks for your patience...

  11. #11
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,245
    I don't remember this but the manual says its a 5mm

  12. #12
    RC Turnbuckle Jr. 87 GN's Avatar
    Join Date
    Mar 2010
    Location
    kansas
    Posts
    7,611
    The stub is 5.98 mm & the thread is 4.89 mm.. I use to have that info now can't find it.??
    Would you go flip my truck back over??

  13. #13
    RC poster
    Join Date
    Nov 2012
    Posts
    17
    I actually phoned my wife and got her to dig around and find an axle in my parts box, I didn't know but she knew how to use a Vernier and was quite insulted when I asked her if she did...she came up with the same measurement for the threads which are then M5. Thanks for the help and the confirmation.
    I will do a thread when I get home in a week on my mod.

  14. #14
    RC Turnbuckle Jr. 87 GN's Avatar
    Join Date
    Mar 2010
    Location
    kansas
    Posts
    7,611
    You have a good woman......
    Would you go flip my truck back over??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •