Results 1 to 4 of 4
  1. #1
    RC Qualifier
    Join Date
    Apr 2013
    Posts
    469

    how to remove axle from diffs? am i missing something...

    I have a 4907 tmaxx 3.3. How do I remove the stock axles from the diffs? am I missing something? I see an allen head screw securing axles to diffs, but it seems there is no room between bulkheads and axle to insert the wrench and to remove the screw. am I missing something? have to take apart bulkheads to get to that screw. thanks. I am trying to learn as much as possible from my tmaxx

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,794
    If I recall there is a cutout at some point in the bulkhead that you can reach a wrench in there, unscrew it and then pull it out.
    The Super Derecho

  3. #3
    RC Racer
    Join Date
    Sep 2012
    Posts
    197
    Quote Originally Posted by Double G View Post
    If I recall there is a cutout at some point in the bulkhead that you can reach a wrench in there, unscrew it and then pull it out.
    This. Its on the bottom. The cutout is also in the stock skids so you dont have to remove them either.
    T-maxx 2.5 | T-maxx 3.3 | T-maxx pro.15

  4. #4
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Westlake Village, CA
    Posts
    263
    And once you get them out. It will be a time saver in the future to take a round file and enlarge the cut outs a little. I've found that the cut outs are just barley big enough to get the pins out.
    Desmosedici RR

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •