Results 1 to 6 of 6
  1. #1
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    31

    Question How To Wire Receiver To ESC and SERVO?

    Hi i unplugged my receiver and forgot how to reconnect it properly like which pins where? I AM A TOTAL NOOB so i wont understand things like channel 1 if you could explain in the easiest way possible lol. or post a picture i would greatly appreciate it! thanks

  2. #2
    RC Qualifier
    Join Date
    Sep 2012
    Location
    Jacksonville, Fl
    Posts
    638
    servo's = channel 1
    esc = channel 2
    b = battery
    EMBE
    Jato 3.3
    T-Maxx 2.5

  3. #3
    RC Qualifier
    Join Date
    Sep 2012
    Location
    Jacksonville, Fl
    Posts
    638
    if your looking at the reciever, the negative(black) wire goes to your right when plugging them into the reciever. power everything up before you put it all away to make sure everything is working correctly to save you trouble of taking it all back out if something dont work when you get it all back together.
    EMBE
    Jato 3.3
    T-Maxx 2.5

  4. #4
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    31
    I still don't know how and don't really understand...?

  5. #5
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Montreal, Canada
    Posts
    528
    Find your manual it was indicated there how is the wiring goes.
    Sharing is the best thing to do on EARTH legally.

  6. #6
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    31
    Nevermind I Found The Channel Numbers ON The Case To the receiver lol. Looks like the receiver didn't need to be replaced and the boat is running like NEW! woo hooo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •