Results 1 to 3 of 3
  1. #1
    RC Enthusiast
    Join Date
    Jan 2012
    Posts
    23

    One way bearing prob

    I've got a picco 26 max and my one way bearing is always getting oil in it after almost every run, causing it to slip. I've cleaned it out multiple times but it always seems to get oil back in it... Any help?

  2. #2
    RC Turnbuckle Jr. Wolfslash16's Avatar
    Join Date
    Mar 2012
    Location
    Riverton Utah
    Posts
    4,363
    Sometimes if your running too rich, oil can build up inside the engine causing it to leak out the back plate, and if the back plate bushing is worn out, oil can leak past also. I'm not sure if I can help diagnose other companys than Traxxas, so good luck.
    Sl2sh Slayer Summit Sl4sh Teton/Rally T-Maxx Pnde

  3. #3
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,770
    Sounds like you may have an issue with Picco and need to talk to them direct. Non-Traxxas product support is not allowed here.
    The Super Derecho

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •