What did you do to your 1/10 RALLY today.......

[humayrayakongkinaon]

figure since other thread doing it i may as well start it here lol

i cant do nothing to mine as this moment as i'm still waiting for it in the mail but, when it arrives...first thing first, i'll take it apart and dye the chassis.

post pics if you can...

[Somaj]

^^^^^ lol same here!

[badaml]

I have not received mine yet, getting it as a roller. Still deciding if I am going to run it as a rally or convert it to a slash.

[humayrayakongkinaon]

same here, i bought mine off ebay as a roller and buy the ESC/motor separate. i got the body and wheels/tires already....setting mine onroad.....gotta love the speed...

[davyjones'_fleet]

like i said before, huma i love that car, its sweeeeeet, love the paint job too

[kwitty]

Ummm, I just put mine up for sale on the Market! What a fantastic car but geeeez I just don't have the time to enjoy it sadly. However I did install a Mamba Max Pro and Castle 2400kv in it!!!

Best to all you great Rally owners

[YOLOer]

Awwe Miss you Kwitty

I finally ordered all the parts I needed for my Rally haha after like a month.

Oh wait I need a Tq and RX

[humayrayakongkinaon]

yeah kwitty.....had a change of heart? looks like your rally are set-up nicely. lucky to the one that will take it from you.

YoLOer, i do need an RX for mine too and 17mm hexes.

guys hows the stock wheels/tires handle and can it withstand 4s?

[Redsawacs]

today, I waited for the chassis to come in......again! Almost everything is here but the chassis and receiver box.....sigh

I sure hope this isn't the case with the slash nitro parts

[humayrayakongkinaon]

wow i cant believe your still waiting for that chassis...red. i would have thought you got it by now and have yours running....

[DiggerPede]

Monday I received my TBR Fr/ Rr bumpers. Nope to get them installed. Tomorrow expecting the taller battery hold down. Then hoping for some RC time this weekend. Fingers are crossed.

[Stephan81]

Charging batteries as we speak. Looks like it might be decent for once outside, somewhat sunny and no sign of rain yet, grounds still soaked but that's ok. I am itching to bash it's been to long. Going to run a few packs through the Rally.

Chassis will be late december from what I see/read everywhere. That's pretty much all I need now, ordered lots of parts to convert my Sl4sh PE to a LCG Rally, soon I'll have 2 Rally's .

[Stephan81]

Well, just got back. Put 3 packs through it. What a blast man!!! Took some videos I will upload some later. Charging up another 3 packs to head back out, this time I am bringing the Launch Ramp and will do some jumps hehe!! Ill post vids! Might not have time as I have to go the boys Xmas concert at 6:00pm but I'll go after if that's the case.

By the way, first time running with the Outerwears shroud. Extremely pleased, ran in the same area I usually do. My chassis would usually be filled with stuff, it's pretty clean in there. No need to take it all apart and clean it. Sure the fit is %100 on but works more than good enough for me. Kept out %95 of the stuff easy.

[DiggerPede]

By the way, first time running with the Outerwears shroud. Extremely pleased, ran in the same area I usually do. My chassis would usually be filled with stuff, it's pretty clean in there. No need to take it all apart and clean it. Sure the fit is %100 on but works more than good enough for me. Kept out %95 of the stuff easy.

Good to hear. I've had the same luck as you to. While not 100% fit, it does doe a good job considering its made for another chassis. A few mods to it and that might make it even better. Glad someone was able to have a blast today.

[humayrayakongkinaon]

mailman showed up early this morning and i thought maybe he have my package cause i see him with boxes at the front of his truck, turns out its for someone else package, oh well still got tomorrow and friday to wait.

[RobF353]

Today I painted my Focus body. I also have Proline Powerstroke shocks and sway bars to install.

[Stephan81]

Nice, any pics Rob?

[RobF353]

Nice, any pics Rob?

I will post pics tomorrow!

[badaml]

My wife gave me an early Xmas present today, my rally roller

[humayrayakongkinaon]

My wife gave me an early Xmas present today, my rally roller

nice, mine will be here tomorrow.

[badaml]

They look nicer in person than in pics. I was debating on keeping it as a rally or converting it to a slash, but after seeing it, I am going to keep it as a rally. Now just trying to decide to use sct wheels/tires or convert to 17mm and use buggy wheels/tires. Suggestions?

[DiggerPede]

I installed the "tall battery hold down" & TBR Fr bumper. Oh and I also charged a couple 3S packs for the Rally and 2S for the little guys MERV. Plans are to burn up those packs when I get home from work. woohoo I'll take some snaps too.

[humayrayakongkinaon]

cant wait for the video to be uplaoded DiggerPede are the tall batt hold down capable of holding 4s?

[DiggerPede]

cant wait for the video to be uplaoded DiggerPede are the tall batt hold down capable of holding 4s?

There is a little room to spare with the 3S pack i'm using. I can take height dimensions for you if you like. I'm guessing you have a 4S pack that could be used?

[dwblue00]

I put a center diff in my rally and going to see how it works this weekend.

[O.G.]

They look nicer in person than in pics. I was debating on keeping it as a rally or converting it to a slash, but after seeing it, I am going to keep it as a rally. Now just trying to decide to use sct wheels/tires or convert to 17mm and use buggy wheels/tires. Suggestions?

This is true. The Rally really is a fantastic design.

I've been ignoring mine for a few weeks, maybe I'll bust it out Monday if the streets are dry.

[badaml]

Bought the Traxxas 17mm hub conversion today

[humayrayakongkinaon]

There is a little room to spare with the 3S pack i'm using. I can take height dimensions for you if you like. I'm guessing you have a 4S pack that could be used?

that would be nice DiggerPede, here is my 4s measurement,
Thickness(mm)
44.79
width (mm)
41.49
Length (mm)
135.03

[DiggerPede]

I measured it at 42mm tall with the 29mm battery hold down in the tall battery kit. You would have to mod the quick release posts to make it fit. We are talking a minimum off 3-4mm to make it happen. Maybe straps to hold it down.

You know the 2200's sweet spot is 4s. At least on the ERBE & EMBE. Can only imagine on this car. LOL

Hope this helps ya.

Sent from my Samsung Galaxy S III ~ using Xparent Green Tapatalk 2

[humayrayakongkinaon]

thanks dig, i can probably put a spacer (2.79mm) to make it up when i get mine.

[badaml]

All stock, except Flux Vapor Pro ESC, Castle 3800kv, Aluminum shock caps, slicks and 17mm Traxxas Hex adapters. It isn't done yet though

[DiggerPede]

Ran the Rally again today. This is the 3rd pack through the new Traxxas CVDs. I ran it pretty hard on road with the ET-2400 motor. Keeping everyone updated with how they are performing. Cleaned the car after the run and inspected everything all good to go at the moment. I'll keep yall posted.

Sent from my Samsung Galaxy S III ~ using Xparent Green Tapatalk 2

[humayrayakongkinaon]

good to hear your having a good time. I got something done today, i use my RS4 aluminum rear knuckles 1.5 degree angle, i just have to drill 1/8mm to fit the pin that hold the knuckle.

[Jersey Crewmax]

I just bought it.

[humayrayakongkinaon]

I just bought it.

nice, what color did you pick?

[Jersey Crewmax]

nice, what color did you pick?

I bought a used roller off of here in Blue. I think it's getting a Novak HV 7.5 550 motor and an HPI Qbase esc (hpi mamba max pro).

Looking forward to getting it.

[revoman78]

humayrayak are those revo springs

[humayrayakongkinaon]

humayrayak are those revo springs

yeah, revo 3.3 suspensions with XO-1 shock towers.

[RobF353]

I got my light kit and light bar in the other day and I just finished installing it.

I just wish the LED's were brighter

[Redsawacs]

VERY NICE light kit -

I'll let you guess what I'm doing to my Rally today......anyone?

"RED"