Results 1 to 3 of 3
  1. #1
    RC poster
    Join Date
    Aug 2012
    Posts
    7

    Calibration issue

    Need of a little help please guys,

    I have followed the guide to re-calibrate the EVX-2.

    but the ESC does not turn green when full throttle is active, only will turn green when it is on reverse??

    i have done the normal procedure, but have noticed when i am tring to calibrate the esc, when u turn on the esc, press and hold untill blinks red once, apply full throttle, then should blink twice to then thats when i should apply brakes, but doesnt blink twice untill i release full throttle.. nor does it turn to green once complete..

    what Am i doing wrong .??

    as result to miss-calibration, i am not getting full protentional on full throttle...

  2. #2
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Chehalis, Wa
    Posts
    436
    I don't know if it matters but see what mode its in. If the mode is set in race mode it will think there is no brake? It's worth a shot. That's the only thing that came to mind.

  3. #3
    RC poster
    Join Date
    Aug 2012
    Posts
    7
    thank you for your advice, anything at the minute is worth a shot...
    i think it may end up with another email being sent to traxxas support,. lol..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •