Results 1 to 15 of 15
  1. #1
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Planet Vegeta
    Posts
    651

    my slash is a rebel

    ok no matter how much i extend my turnbuckles, my slash still steers to the right. the motor loses acceleration and then regains it, the motor also has slow accle. on reverse. how can i fix slop? how do i adjust caster? what should i do?
    All I need now is to set a new lap record.

  2. #2
    RC Champion
    Join Date
    Dec 2010
    Location
    Michigan
    Posts
    1,107
    To adjust your camber, I would recommend purchasing a camber gague, like this one from rpm:
    http://www.rpmrcproducts.com/product...auges.htm#Ride
    If your slash still veers to the right after proper adjustment, you might want to check the servo horn. Take the horn off, turn on the car and set trims on your radio to the neutral position, then place the horn back on to insure the wheels are straight. If it still veers, play with the trims on the radio to get the proper setting.
    Stampede 4x4
    Anza Slash VXL
    Rustler VXL

  3. #3
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Planet Vegeta
    Posts
    651
    i checked servo horn already, the chamber is still hard to adjust though
    All I need now is to set a new lap record.

  4. #4
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Planet Vegeta
    Posts
    651
    motor threw smoke
    All I need now is to set a new lap record.

  5. #5
    RC Qualifier
    Join Date
    Mar 2012
    Posts
    575
    Sucks. Only option is new motor now.

  6. #6
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Planet Vegeta
    Posts
    651
    or a bl motor
    All I need now is to set a new lap record.

  7. #7
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    995
    Need the esc too..
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  8. #8
    RC Turnbuckle Jr. thedreadedend's Avatar
    Join Date
    Jun 2010
    Location
    Springfield, Ma.
    Posts
    3,359
    Time for an upgrade! Its always smart to consider an overkill lol, you know, so you never lack in that department again lol. That's how I do it.
    I'm not a hatchet man! I'm a maggot!

  9. #9
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Planet Vegeta
    Posts
    651
    my dad wanted to get the vxl-3s combo. but he didnt.
    All I need now is to set a new lap record.

  10. #10
    RC Turnbuckle Jr. billy-bones's Avatar
    Join Date
    Nov 2012
    Location
    Michigan
    Posts
    5,222
    Could the skid plate screw plugs have got knocked out of place?just a guess.
    Is your steering bell crank stock,or pro line?
    Built Ford Tuff With Chevy Stuff.

  11. #11
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Planet Vegeta
    Posts
    651
    stock, wanting to go metal
    All I need now is to set a new lap record.

  12. #12
    RC Qualifier
    Join Date
    Nov 2010
    Location
    Knoxville, TN
    Posts
    592
    Forget the stock chassis go lcg

  13. #13
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    995
    Yeah, cheaper than going stock if you do it with no kit, check out my thread

    http://traxxas.com/forums/showthread...=1#post5297959
    Last edited by Kitteh298; 12-19-2012 at 10:43 AM.
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  14. #14
    RC Qualifier
    Join Date
    Nov 2010
    Location
    Knoxville, TN
    Posts
    592
    Or you could two piece it


  15. #15
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Planet Vegeta
    Posts
    651
    Quote Originally Posted by bigdodge44150 View Post
    Forget the stock chassis go lcg
    proline's or which one?
    All I need now is to set a new lap record.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •