my slash is a rebel

[f687s]

ok no matter how much i extend my turnbuckles, my slash still steers to the right. the motor loses acceleration and then regains it, the motor also has slow accle. on reverse. how can i fix slop? how do i adjust caster? what should i do?

[dgudenau]

To adjust your camber, I would recommend purchasing a camber gague, like this one from rpm:
http://www.rpmrcproducts.com/product...auges.htm#Ride
If your slash still veers to the right after proper adjustment, you might want to check the servo horn. Take the horn off, turn on the car and set trims on your radio to the neutral position, then place the horn back on to insure the wheels are straight. If it still veers, play with the trims on the radio to get the proper setting.

[f687s]

i checked servo horn already, the chamber is still hard to adjust though

[f687s]

motor threw smoke

[cbrsilv15]

Sucks. Only option is new motor now.

[f687s]

or a bl motor

[Kitteh298]

Need the esc too..

[thedreadedend]

Time for an upgrade! Its always smart to consider an overkill lol, you know, so you never lack in that department again lol. That's how I do it.

[f687s]

my dad wanted to get the vxl-3s combo. but he didnt.

[billy-bones]

Could the skid plate screw plugs have got knocked out of place?just a guess.
Is your steering bell crank stock,or pro line?

[f687s]

stock, wanting to go metal

[bigdodge44150]

Forget the stock chassis go lcg

[Kitteh298]

Yeah, cheaper than going stock if you do it with no kit, check out my thread

http://traxxas.com/forums/showthread...=1#post5297959

[bigdodge44150]

Or you could two piece it

[f687s]

Forget the stock chassis go lcg

proline's or which one?