I am brand new to nitro rc. I bought a used slayer off ebay. Got it in, bought 20% nitro fuel, got excited, try to start it and it wont start. Has ez start system. Glow plug light lights up as does engine light. Cranks over but wont start. Though i flooded it so i followed procedure to un flood it. Removed glow plug, cranked it over and spit out excess nitro, installed plug disconnected ez start wire and pressed button to heat glow plug to burn of excess. Hooked up wire and still wont start. So i put carb back to factory settings and still no luck. Please please help