Mamba monster??

[MERVILATOR]

Hey i was just wondering if any of you have the mamba monster on your mini E revo's i am seeing alot of them around but wasnt sure. if so are they good? and where could i get one?

[50togo]

Of course they are good! But all you need is the mamba max pro. Castle creations or ebay

[MERVILATOR]

So i went on that site and i am only seeing 1/10 scale to 1/18 scale do you have to make either of those work or do they make a special one for this size of car?

[Jimmie Neutron]

The Monster fits??

[IRgeek]

OK.....the Velineon 380 is the stock size, and just happens to be a 380 size can (motor diameter). The Velineon 3500 is the stock for a 1/10th brushless, and is a 540 can, which is actually the same size can as the brushless version of the 1/16, thus the 540 can size WILL fit with the right motor mount, and this is what a lot of people are doing, putting a 540 can brusless into their 1/16 using either the brushed motor mount or an aftermarket one. As for the other motors, it would take some really ingenious modding to get them to fit in a 1/16 car.

[Jimmie Neutron]

So i went on that site and i am only seeing 1/10 scale to 1/18 scale do you have to make either of those work or do they make a special one for this size of car?

You do not want to go smaller!!

[jimbo74]

OK.....the Velineon 380 is the stock size, and just happens to be a 380 size can (motor diameter). The Velineon 3500 is the stock for a 1/10th brushless, and is a 540 can, which is actually the same size can as the brushless version of the 1/16, thus the 540 can size WILL fit with the right motor mount, and this is what a lot of people are doing, putting a 540 can brusless into their 1/16 using either the brushed motor mount or an aftermarket one. As for the other motors, it would take some really ingenious modding to get them to fit in a 1/16 car.

this might be a typo on your part, but the BRUSHLESS is a 380 size, not a 540!

the velineon 3500 is a 540 sized motor, the same size, as what comes in a BRUSHED version of the 1/16

nothing 1/18th scale will stand up to the traxxas minis... unless you like fried parts and replacing htings a second time

[Jimmie Neutron]

Funny thing is... my brain corrected the typo as I read it. lol

[Maxximum Overdive]

Here you go.



Note: not my truck, just a pic off google. Not recommended if you value your Merv's driveline! Lol!

[Jimmie Neutron]

Look at the size of pinion you would need on that sucker!

I see bent motor plate in this dude's (or dudette's) future.

[Petertje60]

Completely useless to put such a motor in a Merv. You will find no battery that is able to feed it sufficient.

[mike-susieq1]

Look at the size of pinion you would need on that sucker!

I see bent motor plate in this dude's (or dudette's) future.

Man that is some motor on there that's what I thought maybe a 32t pinion would work or a 40t more lol. I don't see it working right on take I think it would just strip or snap everything to pieces.

[Mrmerv76]

Been rocking this 550 on 6s with no issues. Mind you I have all needed driveline upgrades.

[Cameron]

Here you go.



Note: not my truck, just a pic off google. Not recommended if you value your Merv's driveline! Lol!

"I'll take "How to completely shred your drive-line in 2 seconds", for $400" Alex.

Never would have guessed your could make a Mamba 1/8 can fit let alone potentially work.
But so terribly pointless, yet cool. Im torn.

[MooseSlash]

That would be insane...

[mike-susieq1]

notice on the rear shocks all the way compressed? man that things hits from off the curb maybe good by to the chassis, the rx is a no no there imagine if that thing gets interferrence ooh boy total that would be killer funny there that much work and money into it for a cheap AM RX!!!??? , looking at it i dont think the tranny would hold up to the power much either you'll strip the spur gear within a couple mins or just shatter the tranny inside.

[rcbasher]

Wow that's just crazy lol

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[Traxxas117]

This is awesome, i wish someone had a video.