Need Help

[25factorystock]

I have an Emaxx and would like to convert it to brushless. i am new to the hobbie and dont know what i need. Any help would be appreciated.

[Jimmie Neutron]

1/8th power system.
I converted a buddies this summer for less than $200 shipped to my door. This included a 2650kv 1/8th scale motor, 150amp ESC and program card, 17 and 21 tooth pinion, and two 2S 5000mAh 45-90C LiPo's.

The ESC/Motor required some soldering...
I would say a project level of 8 out of 10 due to the need of soldering skills.

Other than that, everything bolted right up.

[Darrel Goheen]

Do you have to use two brushless motors to replace the twin brushed motors? I have a chance to buy a emaxx brushed for 125.00. Good deal?

[Jimmie Neutron]

Good deal if not too much is broke.

Just 1 1/8th scale motor, as stated above.

[Darrel Goheen]

Good deal if not too much is broke.

Just 1 1/8th scale motor, as stated above.

So no other parts are required?

[50togo]

Go for a 2200kv motor a 2650 is more of a buggy motor
Which brushed e maxx is it?
Might be better with a 3800 depending on the model

[Darrel Goheen]

I believe it's a 3906

[50togo]

You wouldn't need the big motor. Read this http://robotwars.00server.com/emaxxfaq.html

[Darrel Goheen]

Thanks for the help.