Results 1 to 11 of 11
  1. #1
    RC Champion
    Join Date
    Feb 2011
    Location
    Lexington, SC
    Posts
    2,173

    Where to get larger pinions?

    Where are you guys getting larger pinions from?
    Jeremy

  2. #2
    RC Enthusiast
    Join Date
    Aug 2012
    Posts
    21
    https://sdp-si.com/eStore/

    Go to spur gears in the menu on the left then metal...
    Click 24 pitch for the search option and bore size 0.1875 it's just a touch smaller than 5mm but you can run some sand paper through it.

    Also kershaw designs has some bigger pinions that are plastic.
    You can get pretty much any size you want from SDP-SI though.

  3. #3
    RC Champion
    Join Date
    Feb 2011
    Location
    Lexington, SC
    Posts
    2,173
    Thanks for the info, Frankie!
    Jeremy

  4. #4
    RC Qualifier
    Join Date
    Jan 2012
    Posts
    479
    Let me know if you have any luck finding metric pitch pinions there
    XO-1 #4...

  5. #5
    RC Champion
    Join Date
    Feb 2011
    Location
    Lexington, SC
    Posts
    2,173
    I looked briefly but didn't see any metric gears.
    Jeremy

  6. #6
    RC Qualifier
    Join Date
    Jan 2012
    Posts
    479
    Yah, tell me about it. I have had no luck finding gears for my setup.
    XO-1 #4...

  7. #7
    RC Turnbuckle Jr. humayrayakongkinaon's Avatar
    Join Date
    May 2011
    Location
    Long Beach, California
    Posts
    6,580
    just exactly how big of a pinion are you looking for? is'nt a 34t pinion big enough for high speed run?
    | Rally GT8 Powered By CC | BackSl4sh Roadrunner |

  8. #8
    RC Qualifier
    Join Date
    Jan 2012
    Posts
    479
    I need a 36T pinion gear for a 6 mm motor shaft
    XO-1 #4...

  9. #9
    RC Champion
    Join Date
    Feb 2011
    Location
    Lexington, SC
    Posts
    2,173
    Quote Originally Posted by humayrayakongkinaon View Post
    just exactly how big of a pinion are you looking for? is'nt a 34t pinion big enough for high speed run?
    It all depends on how fast you wanna go.
    Jeremy

  10. #10
    RC Turnbuckle Jr. humayrayakongkinaon's Avatar
    Join Date
    May 2011
    Location
    Long Beach, California
    Posts
    6,580
    my SlayVo GT-E is geared 20t/34t and with that being said still have to pass thru a transmission.
    http://www.youtube.com/watch?v=HWPZy...&feature=g-upl
    | Rally GT8 Powered By CC | BackSl4sh Roadrunner |

  11. #11
    RC Champion
    Join Date
    Jul 2007
    Location
    Rc Room
    Posts
    1,484
    Quote Originally Posted by bringit View Post
    I need a 36T pinion gear for a 6 mm motor shaft
    I've done it with a gtp to revo spur adaptor from Rc monster, a 8mm-5mm sleeve (rcm) and a 36t,38 or 40t nitro revo spur gears. You'll have to check if he has 8-6mm sleeves or carefully grind that Kershaw down to 5mm. I got about half of the gear thickness to overlap at the mesh.
    Last edited by BL-Bob; 12-03-2012 at 06:42 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •