Where to get larger pinions?

[ponie1992]

Where are you guys getting larger pinions from?

[fdjizm]

https://sdp-si.com/eStore/

Go to spur gears in the menu on the left then metal...
Click 24 pitch for the search option and bore size 0.1875 it's just a touch smaller than 5mm but you can run some sand paper through it.

Also kershaw designs has some bigger pinions that are plastic.
You can get pretty much any size you want from SDP-SI though.

[ponie1992]

Thanks for the info, Frankie!

[bringit]

Let me know if you have any luck finding metric pitch pinions there

[ponie1992]

I looked briefly but didn't see any metric gears.

[bringit]

Yah, tell me about it. I have had no luck finding gears for my setup.

[humayrayakongkinaon]

just exactly how big of a pinion are you looking for? is'nt a 34t pinion big enough for high speed run?

[bringit]

I need a 36T pinion gear for a 6 mm motor shaft

[ponie1992]

just exactly how big of a pinion are you looking for? is'nt a 34t pinion big enough for high speed run?

It all depends on how fast you wanna go.

[humayrayakongkinaon]

my SlayVo GT-E is geared 20t/34t and with that being said still have to pass thru a transmission.
http://www.youtube.com/watch?v=HWPZy...&feature=g-upl

[BL-Bob]

I need a 36T pinion gear for a 6 mm motor shaft

I've done it with a gtp to revo spur adaptor from Rc monster, a 8mm-5mm sleeve (rcm) and a 36t,38 or 40t nitro revo spur gears. You'll have to check if he has 8-6mm sleeves or carefully grind that Kershaw down to 5mm. I got about half of the gear thickness to overlap at the mesh.