Results 1 to 6 of 6
  1. #1
    RC Enthusiast
    Join Date
    Oct 2012
    Posts
    32

    Questions about 2200kv Cooling.

    I got me an XO roller off Ebay and have a MMM 2200KV motor that I am going to put in it. I heard that the 2200 Motors will get these things to 100MPH but will heat up fast. I was thinking of ways to cool the motor via a water cooling system. Would it be a good idea to just wrap copper tubing around the motor can or is there an actual sleeve made for these motors? I want my XO-1 do more then just two passes before reaching TS. And I think a water cooling system might be my best bet. I may even do a small water tank that I can fill with Ice. maybe a cube or two might last me enough time make it though one charge. Just thinking out loud here but tell me what you guys think. Any tips and tricks as well as a "Parts list" would be great. Thx all.

  2. #2
    RC Qualifier
    Join Date
    Dec 2011
    Location
    San Jose, Costa Rica
    Posts
    704
    Quote Originally Posted by Roy Rustler View Post
    I got me an XO roller off Ebay and have a MMM 2200KV motor that I am going to put in it. I heard that the 2200 Motors will get these things to 100MPH but will heat up fast. I was thinking of ways to cool the motor via a water cooling system. Would it be a good idea to just wrap copper tubing around the motor can or is there an actual sleeve made for these motors? I want my XO-1 do more then just two passes before reaching TS. And I think a water cooling system might be my best bet. I may even do a small water tank that I can fill with Ice. maybe a cube or two might last me enough time make it though one charge. Just thinking out loud here but tell me what you guys think. Any tips and tricks as well as a "Parts list" would be great. Thx all.
    Here is my watercooled slash
    http://traxxas.com/forums/showthread...r-cooled-slash

    If you have a question...let me know
    Sl4sh MM2
    T-Maxx 3.3
    Summit 1/10
    Sl2sh VXL

  3. #3
    RC Enthusiast
    Join Date
    Oct 2012
    Posts
    32
    Quote Originally Posted by DBG View Post
    Here is my watercooled slash
    http://traxxas.com/forums/showthread...r-cooled-slash

    If you have a question...let me know
    Do they make a motor wrap/ sleeve for the 2200kv Motor? And were you powering the pump off of its own power source or the receiver? And finally where can I get that pump and how much does it cost?
    Last edited by Roy Rustler; 11-13-2012 at 05:17 PM.

  4. #4
    RC Qualifier
    Join Date
    Dec 2011
    Location
    San Jose, Costa Rica
    Posts
    704
    Quote Originally Posted by Roy Rustler View Post
    Do they make a motor wrap/ sleeve for the 2200kv Motor?

    A/ Yes...Here is the link:
    http://www.offshoreelectrics.com/pro...ham-castle1515


    And were you powering the pump off of its own power source or the receiver?

    A/The power come from the receiver (6v) but the pump works with 12v... But I think is enough with 6v

    And finally where can I get that pump and how much does it cost?

    I bought the pump in Amazon:
    Link:
    http://www.amazon.com/Brushless-Subm...water+pump+cpu
    Blue letters are the answers...
    Sl4sh MM2
    T-Maxx 3.3
    Summit 1/10
    Sl2sh VXL

  5. #5
    RC Enthusiast
    Join Date
    Oct 2012
    Posts
    32
    Quote Originally Posted by DBG View Post
    Blue letters are the answers...
    I cant thank you enough man.

  6. #6
    RC poster
    Join Date
    Nov 2012
    Posts
    5
    Now that I'm getting into my car again, I might have to give this a shot. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •