How do i enable LVC on my E-Revo Brushless 1/10?
This car (maybe all of them?) have the Mamba Monster.
There are no buttons on the ESC that i can see.
+ Reply to Thread
Results 1 to 6 of 6
-
01-12-2013 10:59 AM #1
Enalbe LVC for Lipos on E-Revo Brushless
-
01-12-2013 11:30 AM #2RC Turnbuckle Jr.
- Join Date
- Mar 2010
- Location
- kansas
- Posts
- 6,283
Castle Link, can get one cheap off Ebay.
Refer to this to setup the Mamba Monster ( MMM ) esc for maximum performance:
CASTLE LINK GUIDEWould you go flip my truck back over??
-
01-12-2013 12:07 PM #3
Oh? Is that the only way to do it? with the Castle Link?
-
01-12-2013 12:32 PM #4Marshal
- Join Date
- Nov 2006
- Location
- Northern NJ
- Posts
- 13,435
See: http://www.castlecreations.com/support/documents/drivers_ed_guide.pdf, page 20, for manual programming. You can set it with trigger pulls but unfortunately cannot change the Auto-LiPo setting, which depending on firmware version is 3.0 or 3.2 volts per cell. I'd recommend a LVC of 3.4 or 3.5 volts per cell.
Originally Posted by rvenes
I know they're having their break there by your brake drums. No, you're not invited.
-
01-12-2013 12:48 PM #5RC Champion
- Join Date
- Jan 2012
- Location
- Colorado Springs
- Posts
- 1,848
LVC is default ON and set to 3.2v
"Red"
"Who wants a Rod that you cant Mod?!"
-
01-12-2013 03:30 PM #6RC Enthusiast
- Join Date
- Dec 2012
- Location
- Sydney, Australia
- Posts
- 20
It is on as default from factory
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts