Results 1 to 3 of 3
  1. #1
    RC Competitor
    Join Date
    Sep 2012
    Location
    coatesville pa
    Posts
    63

    ? about revo rpm sensor where to put

    Hello everyone, i have 6 month old revo 3.3 have temp working for telementry on ipod i have mounts for rpm sensor and the rpm sensor wire also , just bought the fly wheel with magnet,took motor out ,but it looks exactly like one i bought already has magnet in it, so what mount out of the 3 do i use and where to put ,talked to support they said i don,t need a telementry gear cover for revo , can anyone help me please THANKS

  2. #2
    RC Competitor
    Join Date
    Sep 2012
    Posts
    72
    Yes, New revo has engine with magnet. and u dont need the gear cover.
    to install rpm sensor, here is quote from KartRacer54:
    Quote Originally Posted by KartRacer54 View Post
    Revo 3.3 uses the A mount. Remove engine bolts from mount. Insert sensor in mount and secure with screw provided. There are two spacers included and I did not use them. Place A bracket on top of engine with bolts and ground wire and retighten the engine to mount. Run the sensor wire to receiver and plug it in. Pretty simple really just tight qtrs.

  3. #3
    RC Competitor
    Join Date
    Sep 2012
    Location
    coatesville pa
    Posts
    63
    Hello THANK YOU ,yes pretty easy thanks,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •