Kawasaki e revo

[50togo]

So all I can find is two brands of sway bars. And both wont work with the roll cage. Anyone know of any others?

[all_rice]

How come the tekno's won't fit?

[50togo]

It would hit my hpp motor brace bracket

[Money pit]

Why do you need a sway bar? are you running or road or track? I go around a very tight track fairly well without them, it just doesn't seem like a good purchase for me. I'll borrow my brother in-laws that he doesn't use sometime and see if they really make a difference, but from what it sounds like you don't really need them.

[MITCH316]

For me I found that the sway bars made my truck a lot more controllable and stable on 2/3s.

[50togo]

Definitely not a must have more of a had it before the roll cage and now I don't. Front still works so if I get creative maybe I will figure something out

[WesleyK]

I guess the traxxas sway bar also doesnt work with the T-Bone rear bumper, or does it? Hm, i actually wanted to try the sway bars but now i don't know anymore.

Hot racing also seems to make sway bars

[50togo]

I only have the front T bone not the rear. Don't know but tekno sway bar will work for you

[Ghostbuster]

Hey 50, I found this website that can machine custom parts for people. Maybe someone could send them a bulkhead that had been modified for a losi diff so they could make one out of Titanium!! http://www.zerohourparts.com

I know this is a long shot if anyone would be willing to try to make one lol. But we can all dream can't we?

[50togo]

Maybe a good idea. Down below on the cnc thread they have something similar in the works!

[Ghostbuster]

Awesome! I really hope that someone can come up with something cool that makes it "Bulletproof"

[50togo]

No.kidding that would be cool! Be one less worry when out bashing

[50togo]

Just installed these lunsford titanium rocker posts. Like them much better them the aluminum posts!

[50togo]

Been waiting to get my e maxx together before bashing but my titanium pins for the maxx was lost in the mail so had to order another set. Be nice to take them both out and come home running

[MITCH316]

You sure have made one tough truck there mate...good work .

[ignis]

It would hit my hpp motor brace bracket

Are you sure? I haven't tried installing Tekno sways on the rear yet, but my HPP brace is on and I can't imagine how it could possibly prevent you from installing the swya bar mount...

[50togo]

Do me a favor and try to instal it on with the brace. I will buy it if it will work. Thanks

[ignis]

[50togo]

thanks ignis! ordered the tekno setup and 42mm bolts .should be here middle of next week

[The Dark Knight]

You've had you're E-Revo a few months now, how are you finding it compared to your merv?

[50togo]

where we bash it's pretty rough .some hills the merv would be fishtailing back and forth just trying to make it up the hill and the erbe just cruises up with no problem. right now we only take the merv's when my erbe or embe is down
this is one of the hills!

[50togo]

Finally have the maxx together might take both out front. I would like to see the difference.in gearing between the two

[50togo]

I was adjusting the Hr double up slipper clutch. Couldn't get it to slip until it was too loose .so I set it where I can just barely nice the slipper when holding the shaft with my hex.
Anyone who has the double clutch how do you set yours?

[MITCH316]

Just got a double slipper myself mate...I am putting it on a road build I've started...this rig is way lighter than my eRevo so we'll see how it holds up.

From your above explanation that's how I would set mine.

[Money pit]

Just got a double slipper myself mate...I am putting it on a road build I've started...this rig is way lighter than my eRevo so we'll see how it holds up.

From your above explanation that's how I would set mine.

Most people change the form of their car to run on different surfaces, you build different cars with a specific surface for each one, I look up to you mate Let me know how that double slipper holds up to "Craig abuse".

[Naaier]

Most people change the form of their car to run on different surfaces, you build different cars with a specific surface for each one, I look up to you mate Let me know how that double slipper holds up to "Craig abuse".

I agree...this guy has some awesome builds...I see he is in the Rally section now with Humayray...it must be the rode build he is referring to.

[50togo]

Going to test both trucks tomorrow and bashing Saturday if all goes as planned

[mike-susieq1]

fingers crossed for a good run and a long long run without breakage this time. are you thinking its going to be faster or slower than before? with the different in gear ratios.

[50togo]

Both trucks loose some top end

[mike-susieq1]

worth it though for them not breaking

[50togo]

Roll cage ready to.roll

[50togo]

I got the tekno sway bar in today. In the rear I had to make the toe links shorter to clear the hpp motor brace but works perfect!

[50togo]

Here's the front
With the traxxas sway bar I had to bend it so it wouldn't hit the roll cage

Now I have to figure how to get my wheelie bar working. Had to take it off wouldn't work with the roll cage either

[all_rice]

Get the tbone rear bumper with wheelie bar!

[50togo]

i saw that that's one 40.00 option!
i have an idea with the traxxas wheelie bar but need something easy to take off for bashing

[50togo]

did some hard bashing today trucks held up good! here is another angle of one of the hills .doesn't look like it but about 10ft tall click on the pic

[MITCH316]

Looks like a good spot to bash mate...nice!!

[50togo]

Its a great place. Has a combination of hill climbs, trails and jumps
Built most of it when we were kids back then for bmx

[50togo]

Courtney won at pomona!
4.025 317.12 low.et!
Click on pic

[ignis]

What kind of car is that? oO