Results 1 to 7 of 7

Thread: Engine bearings

  1. #1
    RC Qualifier
    Join Date
    Feb 2011
    Posts
    392

    Engine bearings

    Alright I need info on how to change my bearings like a broke down cant mess it up explanation my bearings will be here Friday what do need to take apart
    drive it like you stole it

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Tanker 822
    Posts
    9,416
    Take a socket that will just fit through the rear bearing and hold it on the front and tap the front out.
    As for the rear (will work with the front too), heat the block up in an oven at around 250 for about 10 minutes and it'll fall right out when you tap the rear of the block on a piece of wood.
    The Super Derecho

  3. #3
    RC Qualifier
    Join Date
    Feb 2011
    Posts
    392
    Do I need to take the head off or anything do they get pressed back in or something
    drive it like you stole it

  4. #4
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Tanker 822
    Posts
    9,416
    You won't get the piston and sleeve out without the head off. Take everything off do as I said and then the new ones will press in.
    The Super Derecho

  5. #5
    RC Qualifier
    Join Date
    Feb 2011
    Posts
    392
    So I pull the piston sleeve and all out sorry for all the questions never done it
    drive it like you stole it

  6. #6
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,304
    I have a video on YouTube I made search "how to remove nitro crank bearings" the video should be the first one by zachary. hope this helps

  7. #7
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Tanker 822
    Posts
    9,416
    The Super Derecho

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •