Results 1 to 6 of 6

Thread: Not sure...

  1. #1
    RC Qualifier
    Join Date
    Aug 2012
    Posts
    298

    Not sure...

    I believe this is a Traxxas 4 TEC Not 100% sure though...








    Is there no parts support for this??
    Stampede 4x4 VXL.......Slash Raptor 2wd

  2. #2
    Traxxas Marshal cooleocool's Avatar
    Join Date
    Mar 2003
    Location
    Wherever the road takes me.
    Posts
    36,935
    Yes, that is definitely a 4-Tec. They're fun little cars, but parts are getting harder to find for them since the electric 4-Tec was discontinued some time ago.
    "Happiness depends upon ourselves." -Aristotle

  3. #3
    RC Enthusiast
    Join Date
    Jul 2013
    Location
    Peru IN
    Posts
    23
    I am finding most of the Nitro 4-tec parts such as suspension and steering will swap right on. Diffs will work as well with the nitro side plates. As long as you don't need an upper or lower chassis your ok on parts I think. Also they can still be competitive on road cars. The track I race at has a class called street stock. Any electronics, but must use a nimh battery pack and a 20 turn motor. I finish near the front most of the time, unless I run a horrbile lap or get caught in a wreck.
    If I had a cool sig it would go here.

  4. #4
    RC Qualifier
    Join Date
    Aug 2012
    Posts
    298
    Will 190 mm touring car bodies fit good on this?
    Stampede 4x4 VXL.......Slash Raptor 2wd

  5. #5
    RC Enthusiast
    Join Date
    Jul 2013
    Location
    Peru IN
    Posts
    23
    They fit ok, and a 200 will also work IF you switch to the nitro front and rear suspension arms.
    If I had a cool sig it would go here.

  6. #6
    RC Qualifier
    Join Date
    Aug 2012
    Posts
    298
    It runs....Needs some TLC



    Still running the Mechanical Speed control...




    What offset tires/wheels can I use??



    Any thoughts on a budget low powered Bushless setup I can use on this?
    Stampede 4x4 VXL.......Slash Raptor 2wd

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •