Results 1 to 25 of 25
  1. #1
    RC Champion
    Join Date
    Jan 2007
    Location
    Gilbert, AZ
    Posts
    1,249

    The Jang Inspired Stampede 4X4 Truggy :)

    My Little Monster Truggapede 4X4 conversion inspired by The Jang URC...Just for Fun

    HR 17mm Adapters
    Kyosho Wing Mount
    Hot Bodies Buggy Wing
    Proline Bull Dog Ryan Cavalieri Edition
    Waiting on my Wheels....

    Next step is to put some limiters in the shocks to lower the CG

    Stock Velenion Setup Geared at 19/54 on 3S 5000mah Lipo......Hold On!!!!!












  2. #2
    RC Turnbuckle Jr. thedreadedend's Avatar
    Join Date
    Jun 2010
    Location
    Springfield, Ma.
    Posts
    3,356
    Great looking truck, I like it. Looks like some nice gear to start off with. The gearing you chose will most likely smoke a vxl combo, for 3s, you may want to start with 9-11/54 and find the 9 will have to do. I run a sct 3800 and find it tons of fun. My try my 2400 soon though. I running aka cityblocks with the truggy pede I built, ran nice on clay.
    I'm not a hatchet man! I'm a maggot!

  3. #3
    RC Turnbuckle Jr.
    Join Date
    Jun 2010
    Location
    Miami, Fl
    Posts
    6,731
    I like the body, agree with thedreadedend, that gearing is too high for the stock system on 3s, this truggy will look awesome.
    Last edited by RC-Fan; 09-08-2011 at 01:58 AM.

  4. #4
    RC Champion
    Join Date
    Jan 2007
    Location
    Gilbert, AZ
    Posts
    1,249
    I plan on running SC Wheels so it will be very similar to my old Slash 4X4 so it should be pretty good as far as heat is concerned. Plus this is a smaller, shorter, lighter chassis I also just installed a dual fan setup for the Motor and ESC


  5. #5
    RC Champion
    Join Date
    Aug 2010
    Location
    Inver Grove Heights, MN
    Posts
    1,541
    Love the way it looks.

    what wheels/tires are you getting?
    So I taped my hamster to the Pede..

  6. #6
    RC Champion
    Join Date
    Jan 2007
    Location
    Gilbert, AZ
    Posts
    1,249
    Thank you
    Im getting rid of the 17mm Setup and going to run some Proline Split Six Wheels w/ Trencher Tires. Just looking for a good bash setup

  7. #7
    RC Champion
    Join Date
    May 2011
    Location
    Biloxi, MS
    Posts
    1,547
    Let us know about the temps with ur 19/54 gearing w trenchers. Thermals??? Arizona is still pretty hot this time of year isnt it? I like the look so far, should look sweet when ur done.
    Last edited by Dr.J; 09-08-2011 at 09:53 PM.
    Merv, Sl4sh, P4de, Embe, Slash
    2400/2200/4000kv

  8. #8
    RC Turnbuckle Jr. thedreadedend's Avatar
    Join Date
    Jun 2010
    Location
    Springfield, Ma.
    Posts
    3,356
    May be able to do it with trenchers. Dj is talking about sc tranchers so, it may work for him..
    I'm not a hatchet man! I'm a maggot!

  9. #9
    RC Enthusiast
    Join Date
    May 2011
    Posts
    20
    Truck looks Awsome!!! Just was wondering were you got the dual fan combo and who makes it?

  10. #10
    RC Racer
    Join Date
    Jun 2010
    Location
    warwick ny
    Posts
    194
    If u are going with sc trenchers stick with 17mm and get some DE racing 17mm sc wheels to mount them on. Dont throw out your $ on that 12mm junk thats gonna strip the first time you bash hard.
    SUMMIT
    ERBE
    Peed4X42400
    ThunderTigerMT4-G3

  11. #11
    RC Qualifier
    Join Date
    Jan 2009
    Location
    Sweden
    Posts
    487
    For what car is that bulldog? Can it be fitted to a slash 4x4 length?

    Looking ace!!
    Stampede 4x4 4s | Stampede 4x4 1/12

  12. #12
    RC Champion
    Join Date
    Jan 2007
    Location
    Gilbert, AZ
    Posts
    1,249
    Thanks Thomas, you might be able to fit it on a Slash but it's made to fit a TA T4.1 1/10 Truck

    This is the body I really wanted which is from a Ofna Hyper 10TT but everyone is out of stock.


  13. #13
    RC Qualifier
    Join Date
    Jan 2009
    Location
    Sweden
    Posts
    487
    the Jang lit (TT) will not fit mine :/ it is app 50mm longer then the Stampede stock 4x4 car...

    again, it looks REAL mean!!...maybe il be testing
    Stampede 4x4 4s | Stampede 4x4 1/12

  14. #14
    RC Qualifier
    Join Date
    Sep 2011
    Location
    Earth, Milky Way.
    Posts
    925
    Nice paint job!
    This is a signature.

  15. #15
    RC Champion
    Join Date
    Feb 2011
    Location
    Port Alice, BC, Canada
    Posts
    1,076
    Wow, nice job man That's awesome, wanna sell hehehe! Makes me want to do that with the P4de.

    19/54 on 3's with the VXL? Wow, what do you get like 5 minutes run time if that?. I am running 13/52 on 2's Lipos and after one full pack WOT pretty much the whole time, I had to let it cool (motor was like 190 and esc was pretty cool). Can't imagine that 19/54 runs cool on 3's, if so you would be a first that I have heard of. Nice setup regardless
    1/10 Rally x2/P4de/P2de/Rustler/Sl4sh MT

  16. #16
    RC poster
    Join Date
    Dec 2012
    Posts
    2
    Those are some awesome Truggys made out of the Stampede 4x4. I like the paint job of the Monster Energy drink paint job. that was highly creative. I so want a Stampede and make my own truggy.

  17. #17
    RC Qualifier
    Join Date
    Aug 2011
    Location
    delaware
    Posts
    937
    dj it might seem lighter but it not i ran a p4de with 2.8 anacondas on it and i thought i could get away with 17/54 and with dual fans it still got hot to the point it thermaled on 3s so i knocked it down to 14/54 and i was good . not telling you what to do just giving you my experience


  18. #18
    RC Champion
    Join Date
    Dec 2011
    Location
    Lake Jackson, TX
    Posts
    1,396
    Somebody gave me this link
    http://bit.ly/11IgQo2


    Sent from my iPhone 4S using Tapatalk
    Pro-2 SCB 2xSuperMaxx Revo-E G-Slayer

  19. #19
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Austin, Texas
    Posts
    970
    4dash, I think you are a year late.

  20. #20
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Nowhere, Québec, Canada
    Posts
    392
    I did the rustler conversion and I love it!!


    Body is a bit higher, but love it this way. Looks more truggy.

  21. #21
    RC Qualifier
    Join Date
    Aug 2011
    Location
    delaware
    Posts
    937
    Quote Originally Posted by Slaughter33 View Post
    4dash, I think you are a year late.
    thank i didnt even notice that some one revived this thread wonder how it turned out for dj

  22. #22
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Anthem Arizona
    Posts
    391
    Quote Originally Posted by djmaincheese View Post
    Thanks Thomas, you might be able to fit it on a Slash but it's made to fit a TA T4.1 1/10 Truck

    This is the body I really wanted which is from a Ofna Hyper 10TT but everyone is out of stock.

    Heres the body instock.
    http://item.mobileweb.ebay.com/viewi...id=45394131674
    And heres my p4de truggy
    http://m1068.photobucket.com/albumvi....jpg.html?o=46
    We should meet up sometime dj. I live in anthem
    Rc...my wallet hates it...but my brain loves it

  23. #23
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Anthem Arizona
    Posts
    391
    And what bulldog body is that. I like it
    Rc...my wallet hates it...but my brain loves it

  24. #24
    RC Champion
    Join Date
    Jul 2012
    Location
    Yakima, Washington
    Posts
    1,420
    your truck looks awesome i really like that body style

  25. #25
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Nowhere, Québec, Canada
    Posts
    392
    Quote Originally Posted by Gecko5678 View Post
    And what bulldog body is that. I like it
    I'm not sure to who you asked this... XD
    In case it was mine, it's simply a traxxas rustler body!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •