Results 1 to 8 of 8
  1. #1
    RC Champion
    Join Date
    Jan 2012
    Location
    Delaware
    Posts
    1,178

    How do I turn off my VXL-3s?

    How do I turn off my VXL-3s?
    To the men and women of the US military, thank you

  2. #2
    RC Champion
    Join Date
    Jan 2012
    Location
    muscoda, wi
    Posts
    1,245
    unplug the battery. when my vxl-3s is blinking red from lvc sometimes the button wont shut off esc. so i unplug battery.
    I'm not krazy. My mother had me tested.

  3. #3
    RC Champion
    Join Date
    Jan 2012
    Location
    Delaware
    Posts
    1,178
    can pushing the button cause a problem?
    To the men and women of the US military, thank you

  4. #4
    RC Champion
    Join Date
    Mar 2011
    Location
    Zeeland Michigan
    Posts
    1,196
    Quote Originally Posted by TraxxasTuesdays View Post
    can pushing the button cause a problem?
    Know it won't turn off , You hv to unplug it .
    1 Rusty VXL

  5. #5
    RC Champion
    Join Date
    Jan 2007
    Location
    Michigan
    Posts
    1,677
    The VXl CAN be turned off by simply pushing the EZ-set button. Just like when you turn it on.

    Two inserts from the manual

    7. To turn the VXL-3s off, press the EZ-Set button until the
    LED turns off (.5 seconds).


    The VXL-3s does not use a conventional on/off switch. Pressing the
    EZ-Set button on the speed control turns it on and off. It is not necessary
    to install an on/off switch into the wiring harness.
    My previous sig conflicted with a forum policy.

  6. #6
    RC Champion
    Join Date
    Mar 2011
    Location
    Zeeland Michigan
    Posts
    1,196
    Quote Originally Posted by dave00bear View Post
    The VXl CAN be turned off by simply pushing the EZ-set button. Just like when you turn it on.

    Two inserts from the manual

    7. To turn the VXL-3s off, press the EZ-Set button until the
    LED turns off (.5 seconds).


    The VXL-3s does not use a conventional on/off switch. Pressing the
    EZ-Set button on the speed control turns it on and off. It is not necessary
    to install an on/off switch into the wiring harness.
    When mine is blinking , I've to unplug battery . I'm running 5000 SPC 3C 25A .
    1 Rusty VXL

  7. #7
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Snow Belt, Ohio
    Posts
    372
    Quote Originally Posted by rhardy60 View Post
    When mine is blinking , I've to unplug battery . I'm running 5000 SPC 3C 25A .
    Same here...when LVC kicks in you can only turn it off by unplugging the battery. Any other time you can just push the button.

  8. #8
    RC Champion
    Join Date
    Jan 2012
    Location
    Delaware
    Posts
    1,178
    But holding the button can't cause a short circuit and fry my ESC as CastleWoodsRC suggested HERE?
    To the men and women of the US military, thank you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •