Results 1 to 5 of 5
  1. #1
    RC Qualifier
    Join Date
    Mar 2006
    Location
    Canada, Québec
    Posts
    588

    Bearing for transmission 10x15x4mm

    Same Bearing, i have checked the exploded view for seeing if traxxas have changed the small bearing that support the transmission for bigger one because all people put a aftermarket aluminum part with big bearing in the slash and stampede 4x4 ?
    Stampede 4x4 1415 1Y 2400kv, 4S 5200 30C

  2. #2
    RC Champion
    Join Date
    Apr 2007
    Location
    Northwest, AR
    Posts
    1,294
    Quote Originally Posted by samintrepid View Post
    Same Bearing, i have checked the exploded view for seeing if traxxas have changed the small bearing that support the transmission for bigger one because all people put a aftermarket aluminum part with big bearing in the slash and stampede 4x4 ?
    I have found that is there is any weakness in the those trucks it is that bearing. However going with the Aluminum mount as well as the aluminum hub adaptor on the slipper does make the bearing last longer.

    As the 1/10 rally has a different motor mount design from the slash 4x4 the stock one will just have to do until someone makes a replacement.
    Pay It Forward.

  3. #3
    RC Champion
    Join Date
    Sep 2010
    Location
    the giant boot. Anybody?
    Posts
    2,727
    the bearing look's to be enclosed a bit better than the stock 4x4 one.
    *Proud Husband of United state's Air Force wife.*

  4. #4
    RC Champion
    Join Date
    Apr 2011
    Location
    woodstock .on.canada
    Posts
    2,194
    ya the hole shaft looks sealed offon each end
    summit /mustang /stampede-2s spc lipo

  5. #5
    RC Turnbuckle Jr. rag6's Avatar
    Join Date
    Mar 2008
    Location
    PM me if ya wanna bash at Greenwood Bashplex in Pittsburgh PA
    Posts
    13,129
    Just get a higher quality bearing with the stock mount. I did, and it worked fine in my platinum 4x4...

    Disclaimer: Not saying it will handle 6s with a 1/8 motor though...
    Wanna bash at Greenwood Bashplex in Pittsburgh ???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •