Results 1 to 5 of 5
  1. #1
    RC poster
    Join Date
    Oct 2012
    Posts
    3

    jato 3.3 problem


  2. #2
    RC poster
    Join Date
    Sep 2012
    Posts
    15
    has it been broken in? has it been tuned? acceleration could be from lsn needing leaned out. tighten the screw on the spur gear in a little. looks way out compared to mine. might have too much slip. maybe a better description of what its doing?

  3. #3
    RC poster
    Join Date
    Oct 2012
    Posts
    3
    It starts fine the needles i hold on factory setting but when it runs it revs hard sometimes it run a Little when i give it throttle but its really poor. But I Can see that the whell nut sometimes unscrew when the whell bar are running :-)

  4. #4
    RC Turnbuckle Jr. Snook Man's Avatar
    Join Date
    Jan 2008
    Location
    Sugar Hill Ga.
    Posts
    8,370
    Romove the rear wheels and check to see if the wheels or the wheel hexs are stripped.
    No slipper/tall gearing/power = broken parts.

  5. #5
    RC poster
    Join Date
    Oct 2012
    Posts
    3
    I took the wheels of and it looks just fine, but ill try to start it to check on it

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •