Page 1 of 2 12 LastLast
Results 1 to 40 of 55

Thread: My slash 4x4

Hybrid View

  1. #1
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473

    My slash 4x4

    Figured I'd throw up a few pics of my slash.

    Mmp/2400
    21/50 gearing
    Revo slipper/alum slipper pads
    Gh motor mount
    Trx bearing adapter
    Strc finned motor plate
    Mip axles front and rear
    Venom 4s lipo
    Dynamite 3s lipo
    Rustler receiver box

    I think that's it...














  2. #2
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Canada
    Posts
    275
    Why that motor mount over the King Headz?

  3. #3
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Quote Originally Posted by bruggar View Post
    Why that motor mount over the King Headz?
    It was cheaper, uses the same oversized bearing as the king headz, and was in stock at my lhs...

  4. #4
    RC Turnbuckle Jr. vxlrocket's Avatar
    Join Date
    Dec 2007
    Location
    Manassas, Va
    Posts
    6,654
    I think i might try the GH mount too. i've always liked their aluminum. nice truck! it looks like you need new tires soon.
    Associated rc8TE, rc8.2E, B4.2, Ofna LX2E, Slash

  5. #5
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Quote Originally Posted by vxlrocket View Post
    I think i might try the GH mount too. i've always liked their aluminum. nice truck! it looks like you need new tires soon.
    I'm happy w the gh mount. Nothing bad I can say about it.

    I had a set oh trenchers on j concepts wheels, but I had a wheel nut come loose, and the hex inside the rim turned into a nice circle. I have proline beadlocs and switch tires on order. Should be here tomorrow

  6. #6
    RC Champion
    Join Date
    Mar 2010
    Location
    Davenport, Iowa Quad Cities
    Posts
    2,470
    looks good. I don't like my gh mount at all. Has a 3mm gap that lets sand in. I picked it up cheaper than the KH. I wished I gone with the kh. But I'll use the Gh and seal the gap. Nice build btw!
    Thrash It, Bash it, Break it, No Regrets!!!

  7. #7
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Thanks knuckles. I run mine without the gear cover anyway... I really don't bash but in grass and harder packed dirt, otherwise it's asphalt. I had one instance where some mulch got into the gears with the cover on, and I feel like the cover kept it in there.

    One other thing I want to do is buy a new stock chassis and dye it black. The stock one has some deep grooves cut in it from landing on rocks and such.

  8. #8
    RC Champion
    Join Date
    Aug 2012
    Location
    Central NJ
    Posts
    1,245
    Looks good! Your body is in much better shape than mine. Got a flotek ford body on the way. Im too embarrased to post up pics of my manta body now LOL

    Did you add padding to the bottom of the MMM mount for the MMP? It makes it set in there a lot more snugly. There is also a mount that is made specifically for this by a company snappyrc.com. They make a mount for both the regular position and one for the position like you have to allow the longer can motors. They also include screws for mounting the switch. Bought one for the 4x4 my 10 yo son is building now.

  9. #9
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Quote Originally Posted by JustinThyme View Post
    Looks good! Your body is in much better shape than mine. Got a flotek ford body on the way. Im too embarrased to post up pics of my manta body now LOL

    Did you add padding to the bottom of the MMM mount for the MMP? It makes it set in there a lot more snugly. There is also a mount that is made specifically for this by a company snappyrc.com. They make a mount for both the regular position and one for the position like you have to allow the longer can motors. They also include screws for mounting the switch. Bought one for the 4x4 my 10 yo son is building now.
    No, I actually cutdown the posts on the mount itself about 1/8-1/4 inch and used shorter screws to secure it to the chassis. In not interested in the snappy mount, because this mount cost me 3.00 and works perfectly fine.

  10. #10
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Seminole, Florida
    Posts
    439
    Looking good, you might want to run the antenna wire under the steering servo lead. When you get he powerstrokes you will notice a marked improvement in handling. Your shock positions look fine, I tried to move the fronts to two and I body rubbed even with reds. Have you considered a clear spur/pinion cover?
    Slash 4X4, MM 2200kv
    MIP CVD
    Tekno Bigbone

  11. #11
    RC Competitor
    Join Date
    Oct 2012
    Posts
    56
    Quote Originally Posted by Dgb007 View Post
    Have you considered a clear spur/pinion cover?

    I want! Where can I pick one up?

  12. #12
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Seminole, Florida
    Posts
    439
    Quote Originally Posted by Yo Nadz View Post
    I want! Where can I pick one up?
    Amazon, search traxxas clear gear cover
    Slash 4X4, MM 2200kv
    MIP CVD
    Tekno Bigbone

  13. #13
    RC Qualifier
    Join Date
    Aug 2011
    Location
    delaware
    Posts
    937
    nice truck man . have you tried metal hexes

  14. #14
    RC Racer
    Join Date
    Jun 2012
    Location
    HESPERIA, SoCAL
    Posts
    248
    VERY COOL!!!

    Sent from Mars Curiosity.

  15. #15
    RC Champion
    Join Date
    Dec 2011
    Location
    Lake Jackson, TX
    Posts
    1,434
    looking good! I do believe your intake fan is backwards, not that it makes a big difference
    edit: I see that it probably wouldn't reach the rx box the other way..nvm
    Pro-2 SCB 2xSuperMaxx Revo-E SCT410

  16. #16
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,136
    You say it's a mmp but it's actually a mmm...

    How do you like that venom battery?
    Now see with a closer look.. Mamba monster extreme!
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

  17. #17
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Quote Originally Posted by kdvanb View Post
    You say it's a mmp but it's actually a mmm...

    How do you like that venom battery?
    Now see with a closer look.. Mamba monster extreme!
    It is infact a mamba max pro...

    I've only put 1 cycle on the venom battery, but so far I like it. It's a snug fit in the battery tray of the slash. Not thickness wise, but length wise.

  18. #18
    RC Turnbuckle Jr. El Sob's Avatar
    Join Date
    Feb 2010
    Location
    El Sobrante, Ca
    Posts
    7,732
    Great job on upgrading your truck! If you glue your hex into the wheel you can still use them. I solved this problem with aluminum wheels and hex. Nothing to strip out.
    Slash Ultimate, ET-3S, 2400, MIP, King Headz, RPM

  19. #19
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    I was thinking about glueing the hex. I also may try to remove the tires from the rims. If I could save the tires, I'd use them on my beadlocs

  20. #20
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Seminole, Florida
    Posts
    439
    Quote Originally Posted by Cinnabun View Post
    I was thinking about glueing the hex. I also may try to remove the tires from the rims. If I could save the tires, I'd use them on my beadlocs
    You could try that, but if they are glued to a wheel removing the CA from the tire would involve a hobby knife and sore thumbs. Acetone melts CA but discolores plastic as well. I don't believe at that point the removed tires would sit well in the beadloc. What really impressed me when I originally assembled my trenchers was how well they seated. My disdain for CA comes from my RC plane days, you have to use it constantly and I grew to hate the smell and getting it all over my fingers. If I can use beadlocs, have a good tire selection, and reuse rims then I'm good.
    Slash 4X4, MM 2200kv
    MIP CVD
    Tekno Bigbone

  21. #21
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Went outside to do some speed passes... And well I have my first slash mishap. Regeared to 21/52.

    3s.. 49.4mph


    4s.. 55mph before the mishap


    And, the mishap.. Torque steered into a curb when I pulled full throttle and the tires broke traction...


    Snapped the arm at the hinge pins and split the shock body. ****it
    Last edited by Cinnabun; 10-04-2012 at 01:04 PM.
    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  22. #22
    RC Champion
    Join Date
    Dec 2011
    Location
    Lake Jackson, TX
    Posts
    1,434
    bummer! time for upgrades
    Pro-2 SCB 2xSuperMaxx Revo-E SCT410

  23. #23
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Virginia
    Posts
    403
    RPM A-arms and better shocks. I run the Traxxas big bores, but there are a lot of other options out there.
    Slash 4x4 stock
    Slash 4x4 MMP 2400
    KB Fiesta

  24. #24
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    I'm going to get rpms from the lhs tomorrow, and a fellow member is selling me a set of proline shocks
    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  25. #25
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,136
    How's that a mmp though?? Does it just have the mme casing?
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

  26. #26
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Quote Originally Posted by kdvanb View Post
    How's that a mmp though?? Does it just have the mme casing?
    That is how the mmp sct looks I guess? I don't know really, I pulled it out of the castle packaging and installed it. Possibly the esc mount is throwing you off? The mount is from he brushless e revo.
    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  27. #27
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,136
    Quote Originally Posted by Cinnabun View Post
    That is how the mmp sct looks I guess? I don't know really, I pulled it out of the castle packaging and installed it. Possibly the esc mount is throwing you off? The mount is from he brushless e revo.
    I have the sct mmp and it has greenish plastic on part of it.
    That esc is from an xo1
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

  28. #28
    RC Champion
    Join Date
    Aug 2012
    Location
    Central NJ
    Posts
    1,245
    Sorry to hear about the mishap.
    Funny how those curbs jump out to get you.
    The RPM towers tend to flex instead of snapping like stock.

  29. #29
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Getting rpm front arms tomorrow, and a stock shock body until my powerstrokes are here
    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  30. #30
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    It's an mmp, I'm telling you lol

    Here you can see the green sticker...
    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  31. #31
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,136
    Okay.. So do you use the mme casing to help cool the motor more ?
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

  32. #32
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    I don't have a mme case. That is a stock mmp from castle...
    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  33. #33
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Seminole, Florida
    Posts
    439
    Cinnabun , I was able to get 50/24 to fit, have not run it yet, you guessed it. Raining in St Pete. Let you know if speed increases. Let me know when the shock arrive.
    Slash 4X4, MM 2200kv
    MIP CVD
    Tekno Bigbone

  34. #34
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Got my split six beadlocs and switch tires today, rpm front arms, and aluminum hexes. Didn't get any quality run time on the switch tires, but then seemed to hook up ok in the grass.
    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  35. #35
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Seminole, Florida
    Posts
    439
    We you sure those are beadlocs?? Lol
    Slash 4X4, MM 2200kv
    MIP CVD
    Tekno Bigbone

  36. #36
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    Heading back to the lhs to grab a tekno big bone. I found the center driveshaft actually has a split where the rear splines are.
    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  37. #37
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Seminole, Florida
    Posts
    439
    You will find it sets up tight, set the two washers in each cup
    Slash 4X4, MM 2200kv
    MIP CVD
    Tekno Bigbone

  38. #38
    RC Champion
    Join Date
    Aug 2012
    Location
    Central NJ
    Posts
    1,245
    I love the Tekno Big bone. Put all four of the rubber o rings that come with it in. 2 in the front cup and 2 in the rear and the front to back slop goes down to like 1/8". I did the same thing 3 times with the "tubed spline" design. Two stock and one Integy to see if it was just the stock being weak, it wasn't. I even tried to bush the ends so it stayed centered better giving the splines better bite on both ends. It lasted a little longer but in the end the rear contiuned to split the shaft. Oh the joy of running 454 big block in a chevy vega. And yes I did that too once upon a time. Liked the look but nothing would hold up to the power. Ended up keeping the body and scraping the entire chassis for a camaro chassis. Funniest thing I did with the stock chassis was when I couldnt get traction so bled rear tires down to 10 psi. Got plenty then, snapped all the lug bolts off the rear end and her butt sat down on the tires! Im too old to build hot rods now so I apply the same principles to RC instead.

  39. #39
    RC Qualifier
    Join Date
    Feb 2012
    Location
    Delaware
    Posts
    473
    The accident spot. Lol

    Sl4sh mmp2400 - savage flux hp XL - vorza flux hp

  40. #40
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Seminole, Florida
    Posts
    439
    No chalk outline?
    Slash 4X4, MM 2200kv
    MIP CVD
    Tekno Bigbone

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •