I currently run Stampede Talons (front & Back) On my Stock Slash VXL 2wd.
I run my VXL on 2s Lipo's with the Standard out of the box Pinion/Spur gear set-up.
My question is: (1) Do I need to change My Pinion/Spur gear set-up?
(2) Is it wise to change my Steering Servo? Is the Added weight and overall tyre size putting it under pressure.
I am happy with the speed and in general happy with my Overall set-up. I enjoy running the Talons But worry I may be placing my Slash under Pressure.
I am new to the RC Hobby and if this question has been asked before I appologise in advance. Just leaning how to use the Forum at the moment.
+ Reply to Thread
Results 1 to 5 of 5
-
10-03-2012 06:54 AM #1RC poster
- Join Date
- Sep 2012
- Location
- Port Macquarie, Australia.
- Posts
- 9
Help, Tip's & feedback All Appreciated.
-
10-03-2012 06:58 AM #2RC Champion
- Join Date
- Aug 2011
- Location
- Grassie Ontario Canada
- Posts
- 2,308
Im 90% sure the 2075 servo (yours) is stock on a pede 2 wheel drive.
What is your gearing?Slash 2wd, Slash 4x4, 30th digger, Rustler VXL
-
10-03-2012 07:09 AM #3RC poster
- Join Date
- Sep 2012
- Location
- Port Macquarie, Australia.
- Posts
- 9
My gearing is Pinion 23/86 Spur gear.
-
10-03-2012 07:14 AM #4RC Champion
- Join Date
- Aug 2011
- Location
- Grassie Ontario Canada
- Posts
- 2,308
Okay if you have lower gearing like 19/90 should be good
Slash 2wd, Slash 4x4, 30th digger, Rustler VXL
-
10-03-2012 11:34 AM #5RC Qualifier
- Join Date
- Mar 2011
- Location
- Brooklyn Park, MN
- Posts
- 743
Servo should be fine, it is the same one on the stampede, you will want to lower your gearing though.
Mamba Monster 2WD LCG Slash - Spartan
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts