Results 1 to 5 of 5
  1. #1
    RC poster
    Join Date
    Sep 2012
    Location
    Port Macquarie, Australia.
    Posts
    9

    Help, Tip's & feedback All Appreciated.

    I currently run Stampede Talons (front & Back) On my Stock Slash VXL 2wd.
    I run my VXL on 2s Lipo's with the Standard out of the box Pinion/Spur gear set-up.


    My question is: (1) Do I need to change My Pinion/Spur gear set-up?

    (2) Is it wise to change my Steering Servo? Is the Added weight and overall tyre size putting it under pressure.

    I am happy with the speed and in general happy with my Overall set-up. I enjoy running the Talons But worry I may be placing my Slash under Pressure.

    I am new to the RC Hobby and if this question has been asked before I appologise in advance. Just leaning how to use the Forum at the moment.

  2. #2
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,136
    Im 90% sure the 2075 servo (yours) is stock on a pede 2 wheel drive.
    What is your gearing?
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

  3. #3
    RC poster
    Join Date
    Sep 2012
    Location
    Port Macquarie, Australia.
    Posts
    9
    My gearing is Pinion 23/86 Spur gear.

  4. #4
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,136
    Okay if you have lower gearing like 19/90 should be good
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

  5. #5
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    978
    Servo should be fine, it is the same one on the stampede, you will want to lower your gearing though.
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •