Results 1 to 5 of 5
  1. #1
    RC Competitor
    Join Date
    Dec 2011
    Posts
    55

    problems binding

    Well first of all i got a mustang boss 302 and she has been running awesome till last night was playing with it then it just stopped. walked up to it and noticed the the reciever was still green but flashing red at the same time. theres no steer or throttle. ive tryied binding it with other controls still no go

  2. #2
    RC Competitor
    Join Date
    Dec 2011
    Posts
    55
    Then when it's blinking hit the link button it just blinks red. But as soon as you turn it off and back on doing that green and red blinking again

  3. #3
    RC Champion
    Join Date
    Apr 2011
    Location
    woodstock .on.canada
    Posts
    2,185
    servo hands down
    summit /mustang /stampede-2s spc lipo

  4. #4
    RC Competitor
    Join Date
    Dec 2011
    Posts
    55
    Yup it is the servo. Since I have to buy a new one is it worth buying 2 odd then and make it to dual steering servos

  5. #5
    RC Turnbuckle Jr. Jimmie Neutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, MI
    Posts
    12,279
    Duals on this platform is not recommended.
    The servos will fight each other (to the death) as the linkage is not adjustable.
    A single, stronger, servo is best.

    I chose a BB390, the HiTech 5085 is another that works well.

    If you choose the BB, here is how you can set it up:
    BB 390 Set Up

    All stock hardware is used.
    NONE of the hardware included is needed!


    There are tab braces that do not allow the servo guard to sit flush.
    IT IS OPTIONAL TO REMOVE THEM.
    I have done this both ways without any adverse reactions.
    Here is a picture of the braces:

    (thanks goes to danielhr77 for the picture)
    The tab braces create a small gap between the chassis and the servo guard.

    Here is how it plugs in:



    You will also need to reverse the servo direction.
    These are the steps for LINK and TQi radios:

    Hold MENU for 3 seconds
    Green Blinks

    Press MENU
    2 Green Blinks

    Press SET
    Green Blinks

    Press SET
    Red Blinks

    Press SET
    8 Green Blinks

    Hold MENU
    Setup Complete
    Whatever it is I just said... I could be wrong.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •