good set up ?

[revoman78]

Tacon Brushless Motor LBP4074/2.5Y-2000KV paired HOBBYWING XERUN Brushless Motor 150A ESC
any body tried this set up

[revoman78]

any body tried it

[F1fan]

I have been thinking about this set up too. I will be watching this thread but, I think it should be alright.

[87 GN]

nope.. haven't read anything on it either.....
might try another forum google RC forum or Tacon Brushless Motor LBP4074/2.5Y-2000KV

[revoman78]

what about this setup HobbyWing M3A 1:8 Brushless Combo w/ XERUN 21T 4274SL 2000KV Brushless Motor & 150A ESC

[humayrayakongkinaon]

i think pavementsurfer might have a set-up like this, wait 'til he chime in, he'll tell you more about it^^^^

[revoman78]

anybody tried it

[Foxprogt]

Iv used the xerun 150 amp esc before and it was ok after you replace the bullets that will fit the stock 2200kv. A program card is a must with this esc. Only thing i didnt like about it is it didnt have brakes so when you hit reverse, it would go straight into reverse.... unless there is a setting for that somewhere and i missed it. Did alot of front flips because of this X)

[Bigmaxx87]

Tacon Brushless Motor LBP4074/2.5Y-2000KV paired HOBBYWING XERUN Brushless Motor 150A ESC
any body tried this set up

I have that set up on my Emaxx it's really good, on 2s it's little slow but 2x 2s it's awesome

[revoman78]

thanks for the info anybody else want to voice in

[cto]

Yes, I run this setup on my Emaxx and the 2150kv on my Erevo. The Erevo has been running this for almost 2 seasons on 6s. The Emaxx on the first season on 6s. I highly recommend this setup as an alternative to tne MMM. It's half the price with arguably no performance difference. And being at a less expensive price point gives a bit more 'freedom' to really bash it hard knowing that it's not as expensive to replace. It runs cool and has been problem free for me. These drop right into the trucks.

The esc can be set to forward/reverse with brake.

[revoman78]

so you use the hobby wing set up

[cto]

so you use the hobby wing set up

Hobbywing 150A ESC with Tacon motors.

[revoman78]

which tacon motor

[cto]

Both orange can 1/8 motors:

Tacon Brushless Motor LBP4074/2.5Y-2000KV For 1/8th Buggy/Monster Truck
and
Tacon Brushless Motor LBP4074/2Y-2150KV For 1/8 Buggy/Monster RC Truck