Results 1 to 3 of 3

Thread: Trx Carb issues

Hybrid View

  1. #1
    RC poster
    Join Date
    Sep 2012
    Posts
    15

    Trx Carb issues

    Long story short. old carb cracked. Bought a new one. But the horn for the throttle servo is upside down from the old one and it binds my servo a little. Can this be adjusted on the carb? For reference the old carb when looking at it from the lsn, the horn is at about 130. new one is at 730. any help?

  2. #2
    RC Turnbuckle Jr. Nitronaught's Avatar
    Join Date
    Oct 2005
    Location
    South Florida
    Posts
    18,514
    The servo linkage on the carb has a small hex set screw on it. it is 180 degrees from the linkage arm on the throttle, you can loosen that screw and align it.
    Robin Williams
    He will be greatly missed...

  3. #3
    RC poster
    Join Date
    Sep 2012
    Posts
    15
    Thanks for the quick reply. I've never noticed that set screw and i've had it apart probably 20 times. But your absolutely right. That fixed it. Thanks again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •