Does a stock new Revo should wheelies?

[Ziguy]

I just finished breaking and tuned my engine and I was wondering if it's normal that it doesn't wheelie. Maybe it's a sign that it's not properly tuned? Everythink is stock exect for ride height (shafts level).

BTW, my goal is not to have it wheelie.

[Al Morancy]

Keep an eye on your slipper clutch, they are famous for coming loose when new, you want it tight enough that the gear leaves a mark on your thumb when you turn it while locked, I run mine tighten right down but don't do that


It's no shelf queen, but it takes a beating and goes like a raped ape. How come your truck is so clean, beat the thing.

[kgombe1]

yes it is normal the way it is..

[Northleaf]

Keep its center of gravity as low as possible and you should be fine. Even though I don't want mine to wheelie it nearly does at times even in 2nd gear if I do it right.

But in short, out of the box and properly tuned it can wheelie.

Skickat från min LT18i via Tapatalk 2

[badunit]

My experience: Wheelies = need slipper clutch tight = more often replacing stripped spur gear

[MKnAsDad]

you can lean it out more, but just watch your temps.