Page 19 of 20 FirstFirst ... 917181920 LastLast
Results 721 to 760 of 778
  1. #721
    RC poster
    Join Date
    Feb 2013
    Posts
    10
    Using all stock ultimate ESC and transmitter box, where do you mount an antenna???

  2. #722
    RC poster
    Join Date
    Mar 2013
    Posts
    1
    Hey, does anyone know if STRC has any full green chassis left?

  3. #723
    RC Qualifier
    Join Date
    Apr 2012
    Location
    Ft. Stewart, GA
    Posts
    594
    Does the guys at STRC have a electrics mounting plate for the ESC and room for my RX?


    Sent from my iPhone4
    Whatever I just said.. I'm probably wrong..

  4. #724
    RC Champion
    Join Date
    Jan 2013
    Location
    Minnesota
    Posts
    1,306
    Quote Originally Posted by ArmySSG View Post
    Does the guys at STRC have a electrics mounting plate for the ESC and room for my RX?


    Sent from my iPhone4
    Don't think so
    Quote Originally Posted by kungfuchikken View Post
    Hey, does anyone know if STRC has any full green chassis left?
    I highly doubt it but email them and see.
    ERBE
    Savage Flux XL
    Trail finder 2

  5. #725
    RC Competitor
    Join Date
    Feb 2013
    Location
    south fulton tn
    Posts
    53
    Quote Originally Posted by fr8cture View Post
    don't think so


    i highly doubt it but email them and see.
    hey i got pics of my slash in the gallery

  6. #726
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    cant answer the green strc chassis question but i have one also put this on my racer

  7. #727
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    thought i would post some pic while waiting on other parts

  8. #728
    RC Qualifier
    Join Date
    Apr 2012
    Location
    Ft. Stewart, GA
    Posts
    594
    I wish I knew of a place that could anodize I'd totally go with all red pieces oh well!


    Sent from my iPhone4
    Whatever I just said.. I'm probably wrong..

  9. #729
    RC Competitor
    Join Date
    Apr 2012
    Location
    MS
    Posts
    90
    blknryzn did you make that capacitor?

  10. #730
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    Quote Originally Posted by turnleft327 View Post
    blknryzn did you make that capacitor?
    no its a "noxxx" glitch buster

  11. #731
    RC Champion
    Join Date
    Jan 2013
    Location
    Minnesota
    Posts
    1,306
    Quote Originally Posted by ArmySSG View Post
    I wish I knew of a place that could anodize I'd totally go with all red pieces oh well!


    Sent from my iPhone4
    I'm trying to go all red on my E-Revo but it looks like its gonna be red and silver. lol
    ERBE
    Savage Flux XL
    Trail finder 2

  12. #732
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    update almost done missing motor/esc and reciever

  13. #733
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    update put a 4600 in there for now pairing it with a mmp for now. till i decide which one i really want to buy. got rec box in place and found a body that fits will have to figure out the post spots will be and will post pic. body is dhk optimus body

  14. #734
    RC Competitor
    Join Date
    Jul 2012
    Location
    edmonton alberta canada
    Posts
    72
    Anyone know when STRC is going to have more chassis for purchase?

    I have emailed them twice in the last few weeks and no response.

  15. #735
    RC Champion
    Join Date
    Jan 2013
    Location
    Minnesota
    Posts
    1,306
    Quote Originally Posted by Cigarelephant View Post
    Anyone know when STRC is going to have more chassis for purchase?

    I have emailed them twice in the last few weeks and no response.
    yes they should, they are a small company things dont happen overnight.
    ERBE
    Savage Flux XL
    Trail finder 2

  16. #736
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    put motor in along with body posts have to clean up wiring but almost done gonna do a test drive today running 2's not 3's geared 14/54 right now

  17. #737
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    ok test drove the pro 4 and like it alot on 2's but i just couldnt pass up the deal i got on a 2400 with the mmp running 3's geared 14/54 will be changing that after test runs. took me so long with the build i didnt loctite everything i should have will be breaking it down and do a rebuild to make sure i do that. wiring is a mess will clean that up also

  18. #738
    RC Competitor
    Join Date
    Feb 2013
    Location
    south fulton tn
    Posts
    53
    Hey blknryzn do u race ur buggy with electric 1/8 buggys or do u just play with them??? I am just asking man.

    UR RIDES LOOK GOOD BYE THE WAY!!!!!!

  19. #739
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    plan too sid just have to get track time they get hit with the wow factor **** ty sid

  20. #740
    RC Racer
    Join Date
    Sep 2012
    Posts
    156
    Wow the green looks awesome. Very nice build. If you looking for orange or green bell cranks I see Steve just listed them along with the LCG parts.

    The limited edition orange and green steering bell cranks for the 4x4 have been listed at STRC and also the LCG parts have all been listed at aSTRC for those that are looking for new bell cranks and or any LCG parts.

    http://www.teamstrc.com/index.php?ro...path=46&page=4
    http://www.teamstrc.com/index.php?ro...path=46&page=3

    I have been super lazy as my new GTR shocks are at the our hobbyshop but I didn't order springs I need yet so I can get my 4x4 LCG Slash setup up better overall. Need to start working on that.

  21. #741
    RC Qualifier
    Join Date
    May 2012
    Location
    Lafayette,LA.
    Posts
    694
    I am drooling right now. I absolutely love it. Nice build. I want one!


    Sent from Oser world

  22. #742
    RC Champion
    Join Date
    Jan 2013
    Location
    Minnesota
    Posts
    1,306
    Quote Originally Posted by wyd10 View Post
    Wow the green looks awesome. Very nice build. If you looking for orange or green bell cranks I see Steve just listed them along with the LCG parts.

    The limited edition orange and green steering bell cranks for the 4x4 have been listed at STRC and also the LCG parts have all been listed at aSTRC for those that are looking for new bell cranks and or any LCG parts.

    http://www.teamstrc.com/index.php?ro...path=46&page=4
    http://www.teamstrc.com/index.php?ro...path=46&page=3

    I have been super lazy as my new GTR shocks are at the our hobbyshop but I didn't order springs I need yet so I can get my 4x4 LCG Slash setup up better overall. Need to start working on that.
    Do you happen to know when the chassis will be back in stock?
    ERBE
    Savage Flux XL
    Trail finder 2

  23. #743
    RC Competitor
    Join Date
    Feb 2013
    Location
    south fulton tn
    Posts
    53
    hey guys here is the answer on the chassis

    Alysha N.
    To sidney tripp

    Hi Sidney,
    we are so backed up right now in production we are trying to get them back by june hopefully.
    Alysha N.
    Team STRC Customer Support

  24. #744
    RC Qualifier
    Join Date
    May 2012
    Location
    Maryland
    Posts
    334
    My orange STRC Slash



    The General Lee body I painted to go with the orange chassis





    No Limit RC of Maryland

  25. #745
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    very nics slashD

  26. #746
    RC Competitor
    Join Date
    Apr 2012
    Location
    MS
    Posts
    90
    Just wondering if anyone has had issues with their chassis. I have seen the bottom plate spur gear cut out issue that has been posted but I have come across another issue with mine. The rear hinge pin holders that key into the chassis, the keyed part has broken off on the front of both and one of the holes in the chassis has been hollowed out and there are stress cracks around the outside of the hole.[IMG][/IMG]
    [IMG][/IMG]

  27. #747
    RC Racer
    Join Date
    Oct 2012
    Location
    Mt. Washington, KY
    Posts
    232
    Wow!!! That is crazy.
    Did that happen from a big jump our just normal wear and tear?
    Might check mine to see how they look.

  28. #748
    RC Competitor
    Join Date
    Apr 2012
    Location
    MS
    Posts
    90
    No big jumps this is my race truck it sees the track and bench, our track has one "big" jump but you get less then 2 feet of the ground. The other track I race at is an asphalt oval so no jumps there and there is not enough speed involved at either track to do that type of damage.

  29. #749
    RC Racer
    Join Date
    Sep 2012
    Posts
    156
    turnleft327 The only time I have stretched holes on actually any chassis has been when my screw comes just a tad bit loose and then lest the hinge pin brace be able to move around some and also lets the screw act like a reamer. When this happens then I have had holes on a chassis stretch out some. It is very possible that they where a tad loose and on a 4wd SCT I know it can happen very quickly and easily and before you know it a few runs have been made like that and thats probably all it takes to possibly stretch a hole out like that. Every time I have did that to mine it was loose. I did rip one off a touring car chassis that was drilled very close to the edge and hit a sharp corner on the track. It was ugly. Lol

  30. #750
    RC Racer
    Join Date
    Sep 2012
    Posts
    156
    Steve has I think 2 more orange chassis setups and 2 blue ones available. Once gone no more orange. First week in August he will have more of the STRC 4x4 chassis kits in. It is possible that a slight increase in price might happen as the material pricing has gone up since the first run of these chassis's but should be around $10 bucks but still easily the cheapest setup around for quality LCG Slash 4x4 chassis.

  31. #751
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    ty wyd10 looking to get another lcg for my son

  32. #752
    RC Competitor
    Join Date
    Apr 2012
    Location
    MS
    Posts
    90
    wyd10 I know for a fact that the screws were not loose because I check them before each run and I had a hard time removing them when I did take them out to change my slipper to a center diff. At the time tose pics were taken I had maybe 15 battery packs total threw the new chassis. When I built the kit I made sure all screws had plenty of loctite on them and I even let it sit for a day before I even turned it on to make sure the loctite had dried. I do like this chassis setup but I think there are some flaws and this is one of them. I do not think the screw being loose is what caused this anyway I think it was the keyed part of the hinge pin holder that broke off that caused the screw to loosen and then it caused the chassis to hollow out.

  33. #753
    RC Racer
    Join Date
    Jun 2012
    Location
    Bedford TX
    Posts
    179
    Quote Originally Posted by SlashDigger View Post
    My orange STRC Slash

    The General Lee body I painted to go with the orange chassis


    I love that General Lee body. I'd love to make one myself. How did u do the flag?
    Rally GT8 4x4 in progress.
    FLM Rustler

  34. #754
    RC Qualifier
    Join Date
    May 2012
    Location
    Maryland
    Posts
    334
    Quote Originally Posted by skynex721 View Post
    I love that General Lee body. I'd love to make one myself. How did u do the flag?
    Thanks. I had a friend of mine who has a vinyl cutter cut all the paint masks for me. Everything on the truck is paint except for the "sponsor" decals
    No Limit RC of Maryland

  35. #755
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Alberta Canada
    Posts
    895
    Hopefully soon I can get another lcg 4x4. I barely got to use mine. Im going to build mine with tekno parts and maybe tekin or tenshock motor. I hope there is a chassis available when I need it

    Sent from my SGH-I317M using Tapatalk 2

  36. #756
    RC poster
    Join Date
    Jul 2013
    Posts
    4
    Can someone please help me with what would be the best setup for my Slash 4x4 STRC LCG chassis which has the Proline Protrac kit fitted to Proline Caliber tyres. I have all Tekno drive shafts and GTR shocks with AE springs as well as the new TLR Ten SCTE 2.0 shock/spring combo (not using yet as seems a bit soft). The rest of the stuff I got on is Tekin RX8/Pro 4 4600, Savox 1256tg servo, lunsford titanium hingpins and turnbuckles and full Acer ceramic bearings all round.

    Can someone help with a setup sheet that could work well with my current setup??

    Thanks

  37. #757
    RC poster
    Join Date
    Jul 2013
    Posts
    4
    Blknyzn, What are the shocks you are using on your green car? I have installed the Proline Protrac kit and the handling now is phenomenal. You should try it.

  38. #758
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    been away for a sec they are d8's from the vorza buggy

    these are my strc chassis blue/racer orange/rally green/buggy
    Last edited by cooleocool; 08-11-2013 at 07:59 AM. Reason: merge

  39. #759
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Alberta Canada
    Posts
    895
    What 1/8th shocks do you have? I bought some from Ofna I think and they were bigger than Emaxx shocks. I really like the 13mm SC10 4x4 shocks as well.

  40. #760
    RC Qualifier
    Join Date
    Jul 2011
    Location
    cali
    Posts
    444
    96mm d8 shocks all the way around. yes I have those too on the blue racer I just tried different set ups on each one.rally has proline gonna try the gtr next.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •