Results 1 to 3 of 3
  1. #1
    RC Competitor
    Join Date
    Nov 2012
    Location
    Albury, Australia
    Posts
    67

    Brake linkage spring?

    Hi guys,

    My brake linkage spring is fully compressed and no longer doing its job.

    I see I can purchase the linkage set (part 5368) but this will be a waste as I only need the spring.

    Has anyone purchased an aftermarket spring before? I'm not sure what to look for... any ideas/suggestions?

    Thanks

    Sent from my Transformer Prime TF201 using Tapatalk HD
    ---------------
    Traxxas Slayer Pro 4x4

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the water on the hot stuff
    Posts
    9,698
    Cut a piece of fuel line slightly longer than the spring and place it over the spring on the link and test. Should stiffen it up a bit but also have a little give to it.
    The Super Derecho

  3. #3
    RC Competitor
    Join Date
    Nov 2012
    Location
    Albury, Australia
    Posts
    67
    I'll give that a go, cheers

    Sent from Tapatalk on my S3
    ---------------
    Traxxas Slayer Pro 4x4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •