Results 1 to 6 of 6
  1. #1
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    594

    go my new motor!

    alright guys, i got my sc401 4000kv and ex4 esc in the mail! i was curious about what the order of the wires is on the esc? any pics or directions

  2. #2
    RC Champion
    Join Date
    Nov 2010
    Location
    Lilydale, Victoria, Australia
    Posts
    2,845
    No order on a sensorless motor, just hook it up

    If it spins the wrong direction simply swap any two wires to reverse it

    Cheers
    Slash Platinum
    Xerun 150 / Tenshock SC401 3500kv

  3. #3
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    594
    do you know what would work the first time cause im going to connect ir straight to the esc and dont wanna rip it off after i get it and find our its wron

  4. #4
    RC Turnbuckle Jr. O.G.'s Avatar
    Join Date
    Nov 2010
    Location
    South of St Louis
    Posts
    5,986
    If you're going to solder it directly to the esc you need to make sure you've connected it right. The only way to do that is to run it first, then solder.
    My Black & Blue Rally is faster than your color...

  5. #5
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    594
    like hold it to the post things and press the trigger

  6. #6
    RC Qualifier
    Join Date
    Apr 2012
    Posts
    594
    how would i run it first

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •